Dry sorbent injection of trona to control acid gases from a pilot-scale coal-fired combustion facility
| Autor: | James E. Brown, Jeffrey V. Ryan, Tiffany L Berry Yelverton, Carl F. Singer, David G. Nash, Peter H. Kariher |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2016 |
| Předmět: |
lcsh:GE1-350
Sorbent Waste management business.industry Chemistry Coal combustion products acid gases MATS Particulates Combustion complex mixtures Gas analyzer respiratory tract diseases Acid gas Coal emissions reduction coal combustion dry sorbent injection (DSI) business trona NOx lcsh:Environmental sciences General Environmental Science |
| Zdroj: | AIMS Environmental Science, Vol 3, Iss 1, Pp 45-57 (2016) |
| ISSN: | 2372-0352 |
| Popis: | Gaseous and particulate emissions from the combustion of coal have been associated with adverse effects on human and environmental health, and have for that reason been subject to regulation by federal and state governments. Recent regulations by the United States Environmental Protection Agency have further restricted the emissions of acid gases from electricity generating facilities and other industrial facilities, and upcoming deadlines are forcing industry to consider both pre- and post-combustion controls to maintain compliance. As a result of these recent regulations, dry sorbent injection of trona to remove acid gas emissions (e.g. HCl, SO2, and NOx) from coal combustion, specifically 90% removal of HCl, was the focus of the current investigation. Along with the measurement of HCl, SO2, and NOx, measurements of particulate matter (PM), elemental (EC), and organic carbon (OC) were also accomplished on a pilot-scale coal-fired combustion facility. Gaseous and particulate emissions from a coal-fired combustor burning bituminous coal and using dry sorbent injection were the focus of the current study. From this investigation it was shown that high levels of trona were needed to achieve the goal of 90% HCl removal, but with this increased level of trona injection the ESP and BH were still able to achieve greater than 95% fine PM control. In addition to emissions reported, measurement of acid gases by standard EPA methods were compared to those of an infrared multi-component gas analyzer. This comparison revealed good correlation for emissions of HCl and SO2, but poor correlation in the measurement of NOx emissions. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|