Analysis of the static and dynamic properties of wear-resistant Hardox 600 steel in the context of its application in working elements
Autor: | Łukasz Szczepański, Łukasz Konat, Robert Jasiński, Beata Białobrzeska |
---|---|
Jazyk: | angličtina |
Rok vydání: | 2021 |
Předmět: |
Materials science
ductile to brittle transition temperature Mechanical Engineering Context (language use) 02 engineering and technology steel resistant to abrasive wear mechanical properties 021001 nanoscience & nanotechnology Condensed Matter Physics structures 020303 mechanical engineering & transports Brittleness 0203 mechanical engineering Mechanics of Materials fractographic analysis TA401-492 General Materials Science Wear resistant Composite material 0210 nano-technology martensitic boron steel Materials of engineering and construction. Mechanics of materials |
Zdroj: | Materials Science-Poland, Vol 39, Iss 1, Pp 86-102 (2021) |
Popis: | The article discusses the static and dynamic properties of high-strength, boron-containing Hardox 600 steel that is resistant to abrasive wear, both in its delivery state and after normalization. Since the available published material in the literature does not have any real mechanical indicators of the abovementioned steel, a static tension test was carried out at an ambient temperature. The steel’s tensile strength, yield strength, Young’s modulus, elongation and reduction of area were determined from the test. The Charpy impact test at temperatures of −40 °C, −20 °C, 0 °C, and +20 °C and fractographic analysis were performed to determine the transition temperature of ductility to brittleness. In dynamic load conditions, the assigned values of impact energy do not always truly determine the material behavior. Thus, the aim of the fractography was to provide precision when determining the behavior. A significant difference in the impact energy of the tested steel with respect to its heat treatment and ductile-brittle transition temperature was observed and determined based on the impact test result, as well as the nature of the fracture. On the basis of the determined structural and strength characteristics, an analysis of the possibility of application of Hardox 600 steel on selected elements of working machines was performed. |
Databáze: | OpenAIRE |
Externí odkaz: |