Near cut-off wavelength operation of resonant waveguide grating biosensors
Autor: | Zsolt Szabó, Balint Kovacs, Yousef Nazirizadeh, Fabio Aldo Kraft, Martina Gerken, Robert Horvath |
---|---|
Rok vydání: | 2021 |
Předmět: |
Materials science
Science Biophysics Physics::Optics 02 engineering and technology 01 natural sciences Waveguide (optics) Article Optics Sensitivity (control systems) Multidisciplinary business.industry 010401 analytical chemistry Mode (statistics) 021001 nanoscience & nanotechnology 0104 chemical sciences Applied physics Wavelength Optical sensors Medicine Cut-off 0210 nano-technology business Biomedical engineering Biosensor Refractive index Intensity (heat transfer) |
Zdroj: | Scientific Reports, Vol 11, Iss 1, Pp 1-14 (2021) Scientific Reports |
ISSN: | 2045-2322 |
DOI: | 10.1038/s41598-021-92327-4 |
Popis: | Numerical simulations and analytical calculations are performed to support the design of grating-coupled planar optical waveguides for biological sensing. Near cut-off and far from cut-off modes are investigated, and their characteristics and suitability for sensing are compared. The numerical simulations reveal the high sensitivity of the guided mode intensity near the cut-off wavelength for any refractive index change along the waveguide. Consequently, it is sufficient to monitor the intensity change of the near cut-off sensing mode, which leads to a simpler sensor design compared to those setups where the resonant wavelength shift of the guided mode is monitored with high precision. The operating wavelength and the sensitivity of the proposed device can be tuned by varying the geometrical parameters of the corrugated waveguide. These results may lead to the development of highly sensitive integrated sensors, which have a simple design and therefore are cost-effective for a wide range of applications. These numerical findings are supported with experimental results, where the cut-off sensing mode was identified. |
Databáze: | OpenAIRE |
Externí odkaz: |