Modulation of transmembrane pressure in manufacturing scale tangential flow filtration N‐1 perfusion seed culture
Autor: | Daniel J. Karst, Pieter J. Jacobs, Kevin Ramer, Fernie G. Mitchelson, Canping Jiang, Erik Heller Hughes |
---|---|
Rok vydání: | 2020 |
Předmět: | |
Zdroj: | Biotechnology Progress. 36 |
ISSN: | 1520-6033 8756-7938 |
Popis: | Mammalian cells were grown to high density in a 3,000 L culture using perfusion with hollow fibers operated in a tangential flow filtration mode. The high-density culture was used to inoculate the production stage of a biomanufacturing process. At constant permeate flux operation, increased transmembrane pressures (TMPs) were observed on the final day of the manufacturing batches. Small scale studies suggested that the filters were not irreversibly fouled, but rather exposed to membrane concentration polarization that could be relieved by tangential sweeping of the hollow fibers. Studies were undertaken to analyze parameters that influence the hydrodynamic profile within hollow fibers; including filter area, cell density, recirculation flow rate, and permeate flow rate. Results indicated that permeate flow rate had the greatest influence on modulating TMP. Further evaluation showed a significant decrease in TMP when permeate flow was reduced, and this occurred without any negative effect on cell growth or viability. Hence, a 30% reduction of permeate flow rate was implemented at manufacturing scale. A stable operation was achieved as TMP was successfully reduced by 75% while preserving all critical factors for performance in the perfusion bioreactor. |
Databáze: | OpenAIRE |
Externí odkaz: |