Analysis of orthogonal cutting of biocomposites
| Autor: | C. Santiuste, Antonio Díaz-Álvarez, J.L. Cantero, José Díaz-Álvarez |
|---|---|
| Přispěvatelé: | Ministerio de Economía y Competitividad (España) |
| Jazyk: | angličtina |
| Rok vydání: | 2020 |
| Předmět: |
Ingeniería Mecánica
Materials science Linear displacement Delamination Composite number Drilling 02 engineering and technology 021001 nanoscience & nanotechnology Biodegradable composites 020303 mechanical engineering & transports 0203 mechanical engineering Cutting force Flax Ceramics and Composites Trimming Composite material Natural fibers 0210 nano-technology Orthogonal cutting Biocomposite Civil and Structural Engineering |
| Zdroj: | e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid instname |
| Popis: | The use of 100% biodegradable composites in the industry is increasing significantly over the years, mainly due to their excellent properties as well as to the growing ecologic concern. However, after their manufacture, the composite pieces do not always have the final shape, requiring subsequent processing operations, usually drilling and trimming. The performance of cutting processes on fully biodegradable composites are often limited by induced damage as fraying and delamination. This type of phenomena is related, among others, with the cutting parameters and geometries of the tool. Orthogonal cutting is a simplified process that could help in the understanding of damage mechanisms, it is a well-known technique in traditional composites but its use in biocomposites is an almost unexplored field. This work focuses on flax/PLA 100% biodegradable woven composites. The specimens have been manufactured with different angles of orientation, ranging from 0° to 60°, being subjected to orthogonal cutting in a special machine developed for that purpose that allows to develop cutting tests with linear displacement at high speeds. Damage extension, failure modes, and cutting forces are analyzed allowing the extraction of important experimental information. Authors gratefully acknowledges the financial support to the Ministry of Economy and Competitiveness of Spain and FEDER program through the project DPI2017-89197-C2-1-R. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|