Measuring the band structures of periodic beams using the wave superposition method
| Autor: | L. Junyi, V. Ruffini, Daniel S. Balint |
|---|---|
| Rok vydání: | 2016 |
| Předmět: |
010302 applied physics
Physics Frequency response 02 Physical Sciences Acoustics and Ultrasonics Band gap business.industry Mechanical Engineering Metamaterial Acoustics 02 engineering and technology 021001 nanoscience & nanotechnology Condensed Matter Physics 01 natural sciences 09 Engineering Finite element method Optics Mechanics of Materials Direct methods 0103 physical sciences 0210 nano-technology business Electronic band structure Noise (radio) Beam (structure) |
| Zdroj: | Journal of Sound and Vibration. 382:158-178 |
| ISSN: | 0022-460X |
| DOI: | 10.1016/j.jsv.2016.07.005 |
| Popis: | Phononic crystals and elastic metamaterials are artificially engineered periodic structures that have several interesting properties, such as negative effective stiffness in certain frequency ranges. An interesting property of phononic crystals and elastic metamaterials is the presence of band gaps, which are bands of frequencies where elastic waves cannot propagate. The presence of band gaps gives this class of materials the potential to be used as vibration isolators. In many studies, the band structures were used to evaluate the band gaps. The presence of band gaps in a finite structure is commonly validated by measuring the frequency response as there are no direct methods of measuring the band structures. In this study, an experiment was conducted to determine the band structure of one dimension phononic crystals with two wave modes, such as a bi-material beam, using the frequency response at only 6 points to validate the wave superposition method (WSM) introduced in a previous study. A bi-material beam and an aluminium beam with varying geometry were studied. The experiment was performed by hanging the beams freely, exciting one end of the beams, and measuring the acceleration at consecutive unit cells. The measured transfer function of the beams agrees with the analytical solutions but minor discrepancies. The band structure was then determined using WSM and the band structure of one set of the waves was found to agree well with the analytical solutions. The measurements taken for the other set of waves, which are the evanescent waves in the bi-material beams, were inaccurate and noisy. The transfer functions at additional points of one of the beams were calculated from the measured band structure using WSM. The calculated transfer function agrees with the measured results except at the frequencies where the band structure was inaccurate. Lastly, a study of the potential sources of errors was also conducted using finite element modelling and the errors in the dispersion curve measured from the experiments were deduced to be a result of a combination of measurement noise, the different placement of the accelerometer with finite mass, and the torsional mode. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect