Effect of Pillar and Mesh Structure of Tetrahedral Amorphous Carbon (ta-C) Coatings on the Wear Properties and Fracture Toughness of the Coating
| Autor: | Noritsugu Umehara, Motoyuki Murashima, Akinori Shibata, Takayuki Tokoroyama, Yoshiharu Utsumi, Mohd Muhyiddin Bin Mustafa, Hideki Moriguchi |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2019 |
| Předmět: |
diamond-like carbon coating
wear Materials science Physics QC1-999 Pillar engineering.material Engineering (General). Civil engineering (General) Surfaces Coatings and Films fracture toughness Chemistry Fracture toughness Amorphous carbon Coating vickers indenter engineering Tetrahedron TJ1-1570 Crack resistance Mechanical engineering and machinery Composite material TA1-2040 QD1-999 dlc structure crack resistance |
| Zdroj: | Tribology Online, Vol 14, Iss 5, Pp 388-397 (2019) |
| ISSN: | 1881-2198 |
| Popis: | Wear by fracture is among the factors associated with the DLC coating failures in the tribological application. The current study investigated the link between the wear and the fracture-toughness on the novel Pillar and Mesh structure ta-C coatings, in addition to conventional ta-C coatings. The tribological properties of these coatings were examined under base-oil lubrication via ball-on-disk tribo-tester and micro indentation technique was used to characterize the fracture toughness. The wear track and the indentation mark were analyzed using the optical microscope, 3D laser microscope and FE-SEM. The friction coefficient for ta-C, Pillar ta-C and Mesh ta-C are within the range of 0.071 to 0.106. Mesh ta-C indicated the highest wear resistance, followed by the Pillar ta-C and conventional ta-C. Also, Mesh ta-C demonstrated the highest fracture-toughness value with 16.6 MPa·m1/2, followed by Pillar ta-C with 13.4 MPa·m1/2 in contrast to ta-C. Greater resistance to wear for ta-C with Pillar and Mesh structure was detected with an increased fracture-toughness and improvement in crack propagation inhibition. Moreover, the Pillar and Mesh ta-C provides superior rate of crack-energy dissipation as compared to the ta-C. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|