Determination of the Surface Roughness of Heat-Treated Wood Materials Planed by the Cutters of a Horizontal Milling Machine
| Autor: | Mustafa Utar, Tuğba Gürleyen, Mehmet Budakçı, Abdullah Cemil Ilce |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2013 |
| Předmět: |
Environmental Engineering
Materials science biology Significant difference Scots pine Bioengineering Criteria of cutting theory biology.organism_classification Heat treatment Surface roughness Fagus orientalis Wood material Heat treated Quercus petraea Razor Blade Composite material Waste Management and Disposal Beech Cutters of milling machine |
| Popis: | WOS: 000323370400003 The aim of the present study was to determine the surface roughness of heat-treated Scots pine (Pinus sylvestris L.), Eastern beech (Fagus orientalis L.), Uludag fir (Abies bornmulleriana Mattf.), and sessile oak (Quercus petraea L.) wood material samples following planing by the cutters of a horizontal milling machine. The samples that were heat-treated at 140 degrees C or 160 degrees C for 3, 5, or 7 hours were then processed by star blades or razor blades, which are the most frequently used blade types in a milling machine. The surface roughness of the samples was determined by a touch (spined) scan device (TIME TR200), as indicated by the ISO 4287 principle. The results of the study indicate that heat treatment decreases the surface roughness value of the wood material and a significant difference in surface roughness cannot be detected between planing using the razor blade or the star blade. Duzce UniversityDuzce University [BAP-2009.03.01.024] The authors are grateful for the support of the Research Fund of Duzce University, Grant. No. BAP-2009.03.01.024. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|