Mixture design concept and mechanical characteristics of PS ash–cement-treated clay based on the water absorption and retention performance of PS ash
| Autor: | Yoshitoshi Mochizuki, Nguyen Binh Phan, Kimitoshi Hayano, Hiromoto Yamauchi |
|---|---|
| Rok vydání: | 2021 |
| Předmět: |
Cement
Curing (food preservation) Absorption of water Materials science Water absorption and retention Unconfined compressive strength Treatment method Paper sludge ash–cement-treated clay Mixture design Engineering geology. Rock mechanics. Soil mechanics. Underground construction Geotechnical Engineering and Engineering Geology Water/cement ratio Curing time Chemical engineering Critical parameter Soil water Soil stabilization TA703-712 Civil and Structural Engineering |
| Zdroj: | Soils and Foundations, Vol 61, Iss 3, Pp 692-707 (2021) |
| ISSN: | 0038-0806 |
| DOI: | 10.1016/j.sandf.2021.02.006 |
| Popis: | In an attempt to reduce environmental impact, paper sludge ash (PS ash) has recently been studied for its complementary reuse with cement for soil stabilization. In order to establish the optimal mixture design for combining PS ash and cement in soils, a detailed investigation into the stabilizing mechanism is required. To assess the combined effects of PS ash and cement on the strength development of stabilized clay soil, referred to as PS ash–cement-treated clay, a new critical parameter, the unabsorbed and unretained clay-water/cement ratio W*/C, was proposed. To determine W*/C, a new testing method for evaluating the water absorption and retention performance of PS ash was developed. It was revealed that the water absorption and retention rate Wab of PS ash increased with curing time. Unconfined compression tests conducted on the PS ash–cement-treated clay with various water-cement–PS ash mixture proportions and different curing times affirmed that the strength development was fundamentally governed by the parameter W*/C. This suggests that the water absorption and retention rate Wab obtained by the developed method is an essential material parameter in the mixture design for the PS ash–cement-treated clay. It was also found that the effect of the hybrid treatment method, which uses both cement and PS ash, was better than that of the method which uses cement alone, particularly under high W*/C conditions. This indicates that the water absorption and retention performance of PS ash can be fully utilized when the mixture has sufficient unabsorbed and unretained water for cement hydration. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|