| Popis: |
Contactless photo-electrochemical (CL-PEC) etching was used to fabricate recessed-gate AlGaN/GaN high-electron-mobility transistors (HEMTs). Self-termination of etching was observed during CL-PEC etching on an AlGaN barrier layer whose residual thickness had a uniform value of 6 nm overall on the same chip. After tetramethylammonium hydroxide post-treatment, the root-mean-square roughness of the etched surface was around 0.4 nm, which had smoothness comparable to that of the unetched surface. Recessed-Schottky HEMTs showed a positive shift in V-th, the suppression of drain leakage currents, and an improvement in the subthreshold-slope value as compared with planar-gate HEMTs. By applying a metal-insulator-semiconductor (MIS)-gate structure, the gate and drain leakage currents were significantly reduced, leading to an increased input dynamic range. Furthermore, the standard deviations (sigma) of the V-th of CL-PEC-etched recessed-Schottky HEMTs and recessed-MIS HEMTs were very small, 5.5 and 16.7 mV, respectively. These results showed that the CL-PEC etching process is promising for the fabrication of recessed-gate AlGaN/GaN HEMTs having excellent uniformity for normally-off device operations. |
