Digital instrumentation calibration using computer vision
| Autor: | Angel Dacal-Nieto, Fernando Martin-Rodriguez, Esteban Vazquez-Fernandez, Higinio González-Jorge, V. Alvarez-Valado, Arno Formella |
|---|---|
| Přispěvatelé: | Springer Berlin Heidelberg |
| Jazyk: | angličtina |
| Rok vydání: | 2010 |
| Předmět: |
SIMPLE (military communications protocol)
Digital instrumentation Computer science Calibration (statistics) business.industry Interface (computing) 2299 Otras Especialidades Físicas 3304.05 Sistemas de Reconocimiento de Caracteres 2214.02 Metrología Digital interface Computer vision Artificial intelligence Human operator business |
| Zdroj: | Investigo. Repositorio Institucional de la Universidade de Vigo Universidade de Vigo (UVigo) Lecture Notes in Computer Science ISBN: 9783642137747 ICIAR (2) |
| DOI: | 10.1007/978-3-642-13775-4_34 |
| Popis: | This paper describes a computer vision system designed to automatically read the displays of digital instrumentation. The system is used in calibration sessions where many measurements have to be made and where we are interested in getting the whole numerical series downloaded on a host computer. Before our system was running, a human operator had to inspect the instruments at the right times (required by the calibration procedure) and to write down all the results. Note that we are speaking of very simple and sometimes old instruments that usually do not provide a digital interface or a removable memory (and if they do, we do not have a standard interface accepted by all the manufacturers). Results show the benefits of this system, obtaining a success rate higher than 99% in display recognition |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|