Particle detection on flat surfaces
Autor: | Sander van Reek, Jetske Stortelder, Rob Snel, Sjoerd Oostrom, Alfred Abutan, Bert van der Zwan, Jacques van der Donck, Peter van der Walle |
---|---|
Jazyk: | angličtina |
Rok vydání: | 2011 |
Předmět: |
Scanner
TS - Technical Sciences Materials science Industrial Innovation EUV reticles business.industry Extreme ultraviolet lithography Physics particle detection Physics & Electronics Mechatronics Mechanics & Materials High Tech Systems & Materials Substrate (printing) NI - Nano Instrumentation OM - Opto-Mechatronics IM - Instrument Manufacturing law.invention Rapid Nano Optics law Nano Reticle Particle reticle inspection Photolithography qualification business Lithography |
Zdroj: | Extreme Ultraviolet (EUV) Lithography II, 28 February 2011 through 3 March 2011, San Jose, CA, USA, 7969 |
Popis: | Since 2006 EUV Lithographic tools have been available for testing purposes giving a boost to the development of fab infrastructure for EUV masks. The absence of a pellicle makes the EUV reticles extremely vulnerable to particles. Therefore, the fab infrastructure for masks must meet very strict particle requirements. It is expected that all new equipment must be qualified on particles before it can be put into operation. This qualification requirement increases the need for a low cost method for particle detection on mask substrates. TNO developed its fourth generation particle scanner, the Rapid Nano. This scanner is capable of detecting nanometer sized particles on flat surfaces. The particle detection is based on dark field imaging techniques and fast image processing. The tool was designed for detection of a single added particle in a handling experiment over a reticle sized substrate. Therefore, the Rapid Nano is very suitable for the validation of particle cleanliness of equipment. During the measurement, the substrate is protected against particle contamination by placing it in a protective environment. This environment shields the substrate from all possible contamination source in the Nano Rapid (stages, elevator, cabling). The imaging takes place through a window in the protective cover. The geometry of the protective environment enables large flexibility in substrate shape and size. Particles can be detected on substrates varying from 152 x 152 mm mask substrates to wafers up to 200 mm. PSL particles of 50 nm were detected with signal noise ratio of 26. Larger particles had higher signal noise ratios. By individually linking particles in two measurements the addition of particles can be detected. These results show that the Rapid Nano is capable of detecting particles of 50 nm and larger of a full reticle substrate. © 2011 Copyright Society of Photo-Optical Instrumentation Engineers (SPIE). |
Databáze: | OpenAIRE |
Externí odkaz: |