Porous cordierite-supported polyethyleneimine composites for nickel(II) and cadmium(II) ions removal
| Autor: | Vladimir B. Pavlović, Danka Radic, Jelena Rusmirović, Nina Obradović, Darko Kosanović, Suzana Filipović, Aleksandar D. Marinković |
|---|---|
| Rok vydání: | 2020 |
| Předmět: |
Cadmium
Materials science Sorbent chemistry.chemical_element Cordierite 02 engineering and technology 010501 environmental sciences engineering.material adsorption capacity 01 natural sciences 6. Clean water Ion Nickel 020401 chemical engineering chemistry Chemical engineering sorbents 13. Climate action engineering 0204 chemical engineering heavy metals porous ceramics Porosity cordierite 0105 earth and related environmental sciences |
| Zdroj: | Desalination and Water Treatment |
| DOI: | 10.5004/dwt.2020.25736 |
| Popis: | Industrial/technological growth is directly connected with environmental pollution, but its influence can be minimized through pollution abatement approaches such as the treatment of industrial wastewater. In this study, novel porous amine-functionalized silicate minerals, specifically, cordierite was investigated for the removal of toxic heavy metals from industrial wastewaters. Cordierite supports were synthesized by mixing MgO, Al2O3, and SiO2 powders in 2:2:5 molar ratios, and mechanically activated via ball milling in ethanol for 10, 40, or 80 min. Pellets were sintered by heating in air at 20 degrees C min(-1) to 1,350 degrees C, for 2 h. Porous supports were produced by coarsely crushing the sintered pellets and mixing the crushed and sieved cordierite powder with 20 wt.% of a pore-forming agent, either nanocellulose or yeast. The resulting pellets were sintered by heating at 5 degrees C min(-1) to 700 degrees C in air. The synthetic cordierite support was modified by treatment in poly-ethylenimine. Activated supports were then tested for the removal of Ni2+ and Cd2+ ions. The phase composition of the cordierite supports was analyzed by the X-ray diffraction, Fourier-transform infrared spectroscopy, and scanning electron microscopy. Analysis of adsorption isotherms, kinetics, and thermodynamic parameters indicated that adsorption was a spontaneous, endothermic process with a maximum adsorption capacity of 36 mg g(-1) for Cd2+ and 43 mg g(-1) for Ni2+. This work has shed light on the mechanism of heavy metal removal from the aquatic medium using the novel hybrid functionalized cordierite-based ceramic. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|