Technical Note: Fabricating Cerrobend grids with 3D printing for spatially modulated radiation therapy: A feasibility study

Autor: Dandan Zheng, Y Lei, J Driewer, Andrew Z. Wang, Qinghui Zhang, Sumin Zhou, Vivek Verma, Sicong Li, Mutian Zhang, Timothy J. Cullip, Sha Chang, X Zhu, Charles A. Enke
Rok vydání: 2015
Předmět:
Zdroj: Medical Physics. 42:6269-6273
ISSN: 2473-4209
0094-2405
DOI: 10.1118/1.4932223
Popis: Purpose: Grid therapy has promising applications in the radiation treatment of large tumors. However, research and applications of grid therapy are limited by the accessibility of the specialized blocks that produce the grid of pencil-like radiation beams. In this study, a Cerrobend grid block was fabricated using the 3D printing technique. Methods: A grid block mold was designed with flared tubes which follow the divergence of the beam. The mold was 3D printed using a resin with the working temperature below 230 °C. The melted Cerrobend liquid at 120 °C was cast into the resin mold to yield a block with a thickness of 7.4 cm. At the isocenter plane, the grid had a hexagonal pattern, with each pencil beam diameter of 1.4 cm; the distance between the beam centers was 2.1 cm. Results: The dosimetric properties of the grid block were studied using small field dosimeters: a pinpoint ionization chamber and a stereotactic diode. For a 6 MV photon beam, its valley-to-peak ratio was 20% at d max and 30% at 10 cm depth; the output factor was 84.9% at d max and 65.1% at 10 cm depth. Conclusions: This study demonstrates that it is feasible to implement 3D printing technique in applying grid therapy in clinic.
Databáze: OpenAIRE
Externí odkaz: