Experimental and computational fluid dynamics investigations of tracking CPC solar collectors
| Autor: | Fabienne Sallaberry, Bengt Perers, Simon Furbo, Guofeng Yuan, Weiqing Kong, Jianhua Fan |
|---|---|
| Rok vydání: | 2020 |
| Předmět: |
Materials science
020209 energy Nuclear engineering Heat loss coefficient 02 engineering and technology Computational fluid dynamics Solar irradiance chemistry.chemical_compound ETFE Thermal 0202 electrical engineering electronic engineering information engineering General Materials Science Nonimaging optics FOIL method Renewable Energy Sustainability and the Environment business.industry Compound parabolic concentrator (CPC) solar collector Ray tracing Atmospheric temperature range CFD simulations 021001 nanoscience & nanotechnology Thermal efficiency measurements chemistry Ray tracing (graphics) 0210 nano-technology business |
| Zdroj: | Yuan, G, Fan, J, Kong, W, Furbo, S, Perers, B & Sallaberry, F 2020, ' Experimental and computational fluid dynamics investigations of tracking CPC solar collectors ', Solar Energy, vol. 199, pp. 26-38 . https://doi.org/10.1016/j.solener.2020.01.090 |
| ISSN: | 0038-092X |
| DOI: | 10.1016/j.solener.2020.01.090 |
| Popis: | The aim of the paper was to investigate thermal performance of two newly developed 15.4 m2 compound parabolic concentrator (CPC) solar collectors both theoretically and experimentally. The two collectors are identical except that one collector is equipped with a transparent Ethylene tetrafluoroethylene (ETFE) foil and the other collector is not. Experimentally the solar collectors were tested in an outdoor test facility at different temperatures. Collector efficiencies were determined. Theoretically simplified CFD models of the CPC solar collectors were developed and validated against the measurements. A ray tracing tool Tonatiuh was used to calculate distribution of solar irradiance on the receiver. The influence of the ETFE foil on collector heat loss coefficient and efficiency was investigated. The results show that the CFD model predicts satisfactorily temperature rises of the collectors in the temperature range between 20 °C and 81 °C. The deviations between the measured and the calculated temperature rises were limited to ±0.3 K with a relative error less than 3.7%. By installation of the ETFE foil, the first order collector heat loss coefficient decreased from 1.42 to 0.82 W/m2/K. Efficiency of the collector with the ETFE foil was measured to be 63%, 55% and 54% for a mean collector fluid temperature of 27 °C, 63 °C and 81 °C respectively. For a solar irradiance of 895 W/m2 and a mean collector temperature of 133 °C, collector efficiency is predicted to increase from 36% to 41% by installation of the ETFE foil. Another 5% increase of collector efficiency is expected if installation of the foil is made airtight. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect