Evaluation of single liquid primers with organic sulfur compound for bonding between indirect composite material and silver-palladium-copper-gold alloy
| Autor: | Naomi Tanoue, Hiroki Nikawa, Hideo Matsumura, Saiji Shimoe, Takeshi Murayama, Takahiro Satoda |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2010 |
| Předmět: |
Dental Stress Analysis
Materials science Alloy Composite number chemistry.chemical_element Dental bonding engineering.material Methacrylate Composite Resins Indirect composite Thiouracil Materials Testing Shear strength Composite material 3-Mercaptopropionic Acid General Dentistry Sulfur Compounds Bond strength Dental Bonding technology industry and agriculture Thiones equipment and supplies Sulfur Primer Resin Cements Solvent chemistry Inlays Propylene Glycols Silver-palladium-copper-gold alloy Ceramics and Composites engineering Gold Alloys Methacrylates Shear Strength Dental Alloys |
| Zdroj: | Dental Materials Journal. 29(1):25-29 |
| ISSN: | 0287-4547 |
| Popis: | The purpose of this study was to evaluate the effect of primers on bonding between a silver-palladium-copper-gold alloy and an indirect composite material. Cast disks were air-abraded with alumina, conditioned with one of five primers (Alloy Primer, Luna-Wing Primer, Metal Primer II, Metaltite, M.L. Primer), and bonded with a light-activated indirect composite. Shear bond strengths were determined after 20,000 times of thermocycling. The results showed that four of the primers, except the Luna-Wing Primer, were effective in enhancing the bond strength as compared with the unprimed control group. Of these four primers, Alloy Primer, Metal Primer II, and M.L. Primer exhibited significantly greater bond strengths. It can be concluded that the effectiveness of primers varies considerably according to the organic sulfur compounds added to the solvent, and that care must be taken in selecting priming agents for bonding the composite material and the silver-palladium-copper-gold alloy. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|