Influence of laser surface treated on the characterization and corrosion behavior of Al–Fe aerospace alloys

Autor: Kelly dos Santos, Katieli Tives Micene, Angela Aparecida de Oliveira Camargo de Lima, Viviane Teleginski, Moisés Meza Pariona, Rudimar Riva, A. J. Zara
Rok vydání: 2013
Předmět:
Zdroj: Applied Surface Science. 276:76-85
ISSN: 0169-4332
DOI: 10.1016/j.apsusc.2013.03.025
Popis: In this research laser surface remelting without protective coating with a 2 kW Yb-fiber laser (IPG YLR-2000S) was applied in the Al–1.5 wt.%Fe alloy in order to investigate the layer treated with different techniques of superficial characterization, thereby, the technique of optical microscopy, atomic force microscopy and low-angle X-ray diffraction were used. The present work mainly focuses on the corrosion study by diverse techniques in aggressive environment of the laser-treated area and the substrate material was carried out, thereby, at open circuit potential testing, the results have shown a displacement to more anodic values in the corrosion potential for the laser-treated specimen when compared to the untreated specimen; in potentiodynamic polarization tests have shown that as a result of the laser treatment, the corrosion current can be reduced by as much as ten times, and a passive region was obtained, which served as an effective barrier for reducing anodic dissolution and finally, the result in cyclic polarization curves of the untreated sample there was a greater area of the hysteresis loop, implying that it is more susceptible to corrosion. This study was complemented by other techniques mentioned above in order to elucidate this study. Laser surface remelting process has definitely modified the surface film, which results in higher corrosion resistance, a large range of passivation and a lower area of the hysteresis loop.
Databáze: OpenAIRE
Externí odkaz: