Energy Consumption Analysis of Sintering Temperature Optimization of Pure Aluminum Powder Metal Compacts Sintered by Using The UHFIS
| Autor: | Pınar Sari Çavdar, Uğur Çavdar, Gürkan Soy, Mehmet Taştan, Hayrettin Gökozan |
|---|---|
| Rok vydání: | 2017 |
| Předmět: |
Materials science
Metallurgy Engineering Multidisciplinary chemistry.chemical_element Sintering Mühendislik Ortak Disiplinler 02 engineering and technology Energy consumption Aluminum PM Induction Energy cost 021001 nanoscience & nanotechnology Induction system 020303 mechanical engineering & transports 0203 mechanical engineering chemistry Aluminium Powder metallurgy Energy cost 0210 nano-technology |
| Zdroj: | Volume: 9, Issue: 3 174-185 International Journal of Engineering Research and Development |
| ISSN: | 1308-5514 |
| DOI: | 10.29137/umagd.348072 |
| Popis: | In this study, pure aluminum (Al) powder metal (PM) compacts are sintered conventional or induction systems. PM compacts are sintered by furnace at 600 ° C in 60 minutes in the conventional sintering process. In the other process, PM compacts are sintered by induction system at seven different sintering temperatures from 550 ° C to 610 ° C in 4 minutes. 2.8 kW, 900 kHz ultra-high frequency induction system (UHFIS) used for heating application of induction sintering process. Densities and hardness values are investigated for both processes. During these sintering processes, all energy consumption results are measured and calculated, than compared with each other. The effects of the sintering time increase in the induction sintering process on energy cost have been analyzed. Optimum sintering temperature of the induction sintering process is determined. It has been seen that the cheaper energy cost is obtained by the induction system for sintering application. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|