Characterization and use of raw materials from Burkina Faso in porcelain formulations
Autor: | Moustapha Sawadogo, Mohamed Seynou, Youssouf Sawadogo, Philippe Blanchart, Lamine Zerbo, Moussa Gomina |
---|---|
Jazyk: | angličtina |
Rok vydání: | 2020 |
Předmět: |
Materials science
Absorption of water Sintering and porcelain Muscovite Characterization Metallurgy General Engineering Energy Engineering and Power Technology engineering.material Casting Albite Flexural strength Formulation Illite engineering lcsh:TA401-492 Kaolinite Clay lcsh:Materials of engineering and construction. Mechanics of materials Quartz |
Zdroj: | Results in Materials, Vol 6, Iss, Pp 100085-(2020) |
Popis: | The use of three mineral materials from Burkina Faso in the formulation of porcelains has been studied. The characterization results showed that the clay NONG contains kaolinite (62%), illite (18%), quartz (17%) and rutile (1%). The pegmatite PEG contains albite (17%), muscovite (44%) and quartz (34%). The sand SAB is mainly composed of quartz. Some samples were shaped by casting into porous molds and sintered at temperatures ranging from 1200 °C to 1300 °C. Characterization of the specimens sintered at 1250 °C evidenced interesting results: a density ranging from 2.3 to 2.5; a water absorption below 0.5%; an open porosity of less than 1%; a flexural strength above 35 MPa. Consequently, materials fired above this temperature are closely related to the porcelain group. |
Databáze: | OpenAIRE |
Externí odkaz: |