| Popis: |
The growth of rhenium nitride and rhenium metal thin films is presented using atomic layer deposition (ALD) with the precursors methyltrioxorhenium and 1,1-dimethylhydrazine. Saturative, self-limiting growth was determined at 340 °C for pulse times of ≥4.0 s for methyltrioxorhenium and ≥0.1 s for 1,1-dimethylhydrazine. An ALD window was observed from 340 to 350 °C with a growth rate of about 0.60 A/cycle. Films grown at 340 °C revealed an root mean square surface roughness of 2.7 nm for a 70 nm thick film and possessed a composition of ReN0.14 with low O and C content of 1.6 and 2.6 at.%, respectively. Enhanced nucleation on in-situ grown TiN, relative to thermal SiO2, enabled a conformality of 98% on high aspect ratio trenched structures. Subjecting the ReN0.14 thin films to thermal or chemical and thermal treatments reduced the nitrogen content to ≤1.6 at.%, yielding a film purity of about 96 at.% rhenium and resistivities as low as 51 µΩ cm. The Re metal film thicknesses on the trenched structures remained intact during the post-deposition annealing treatments and the films did not delaminate from the substrate surfaces. |
