By-products: oil sorbents as a potential energy source
| Autor: | Olga K. Karakasi, A. Moutsatsou |
|---|---|
| Rok vydání: | 2012 |
| Předmět: | |
| Zdroj: | Waste Management & Research: The Journal for a Sustainable Circular Economy. 31:376-383 |
| ISSN: | 1096-3669 0734-242X |
| Popis: | The present study investigated the utilization of an industrial by-product, lignite fly ash, in oil pollution treatment, with the further potential profit of energy production. The properties of lignite fly ash, such as fine particle size, porosity, hydrophobic character, combined with the properties, such as high porosity and low specific gravity, of an agricultural by-product, namely sawdust, resulted in an effective oil-sorbent material. The materials were mixed either in the dry state or in aqueous solution. The oil sorption behaviour of the fly ash–sawdust mixtures was investigated in both marine and dry environments. Mixtures containing fly ash and 15–25% w/w sawdust performed better than each material alone when added to oil spills in a marine environment, as they formed a cohesive semi-solid phase, adsorbing almost no water, floating on the water surface and allowing total oil removal. For the clean-up of an oil spill 0.5 mm thick with surface area 1000 m2, 225–255 kg of lignite fly ash can be utilized with the addition of 15–25% w/w sawdust. Fly ash–sawdust mixtures have also proved efficient for oil spill clean-up on land, since their oil sorption capacity in dry conditions was at least 0.6–1.4 g oil g−1 mixture. The higher calorific value of the resultant oil–fly ash–sawdust mixtures increased up to that of bituminous coal and oil and exceeded that of lignite, thereby encouraging their utilization as alternative fuels especially in the cement industry, suggesting that the remaining ash can contribute in clinker production. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|