Novel testing system to determine shoe mechanical properties
| Autor: | Kirsten M. Anderson, Ellyson Martens, Olivia Powers, Jason M. Wilken |
|---|---|
| Rok vydání: | 2022 |
| Předmět: | |
| Zdroj: | Prosthetics & Orthotics International. 46:646-650 |
| ISSN: | 1746-1553 0309-3646 |
| DOI: | 10.1097/pxr.0000000000000149 |
| Popis: | Shoes play an important role in ankle foot orthosis (AFO) function and alignment. Despite this, shoe mechanical testing systems are rarely colocated with gait analysis systems, limiting their availability and use during AFO-related studies.The purpose of this study was to evaluate a novel mechanical testing system used to measure shoe heel stiffness and change in height with loading using equipment available in most gait analysis laboratories. The novel testing system will allow for shoe assessment during AFO studies at little additional cost.Shoes were tested to determine initial stiffness, terminal stiffness, and total stiffness, and whether these measures changed with repeated compressions (early vs. late).The novel testing system consists of a baseplate for counterweights, uprights that support a low-friction hinge, and a lever arm with a heel-shaped indenter to apply force to the shoe. Minimal detectable change values were calculated using the standard error of measurement. Intraclass correlation coefficients were calculated in SPSS using a (2, k) model.No significant differences in mean values, or interactions, were observed between rounds of testing and early and late compressions (P.05). Intraclass correlation coefficient values were greater than 0.98, and minimal detectable change values were less than 20% of the average for each measure.The novel mechanical testing system, combined with pre-existing gait analysis equipment, can be used to reliably assess shoe stiffness and change in height. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|