Low-Cost Hybrid Manufactured Waveguide Bandpass Filters with 3D Printed Insert Dielectric
| Autor: | Uros Jankovic, Ananjan Basu, Djuradj Budimir, N. Mohottige |
|---|---|
| Rok vydání: | 2019 |
| Předmět: |
Waveguide filter
Materials science Acoustics 020208 electrical & electronic engineering 020206 networking & telecommunications 02 engineering and technology Stopband Filter (signal processing) law.invention Resonator Filter design 3D printed additive manufacturing (AM) directcoupled- resonator filter frequency-variant couplings waveguide filter Band-pass filter law 0202 electrical engineering electronic engineering information engineering Waveguide Passband |
| Zdroj: | 2019 49th European Microwave Conference (EuMC). |
| Popis: | A new type of simple and inexpensive waveguide filter manufacturing that minimizes material consumption and has capabilities of high performance and rapid prototyping is presented in this paper. Filter inserts are fabricated by a combination of additive dielectric manufacturing and subtractive metal manufacturing, whereas standard waveguides are used as housings, utilizing best properties of each technology. Along with it, a suitable filter design using metal rectangular rings has been developed. Since the rings that act as positive reactance discontinuities in the passband are resonant at frequencies below it, it is possible to bring lower stopband transmission zeros near the passband to create sharp skirt. A resonator of such a filter and a third order bandpass filter sample have been designed at 11.13 GHz and 11.36 GHz centre frequencies respectively. In addition, by reducing size of rectangular rings in the waveguide, upper stopband transmission zeros can be realized, while the rings act as negative reactance discontinuities in the passband. This was utilized in a fourth order bandpass filter with 9.62 GHz centre frequency to have finite transmission zeros in both stopbands. All the filtering structures have been fabricated with 3D printer to extrude polylactic acid and circuit board plotter to mill copper sheet. Excellent measurement results that have been obtained validate the proposed design. Practical sides of achieving quality 3D printouts are analysed. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|