Comparative design study of a diesel exhaust gas heat exchanger for truck applications with conventional and state of the art heat transfer enhancements
| Autor: | G. Bergeles, G. C. Mavropoulos, Sofia G. Mavridou, D. Bouris, Dimitrios T. Hountalas |
|---|---|
| Rok vydání: | 2010 |
| Předmět: |
Engineering
business.industry Heat transfer enhancement Plate heat exchanger Energy Engineering and Power Technology Mechanical engineering Concentric tube heat exchanger Industrial and Manufacturing Engineering Run-around coil Heat spreader Plate fin heat exchanger Recuperator TJ business Shell and tube heat exchanger |
| Zdroj: | Applied Thermal Engineering. 30:935-947 |
| ISSN: | 1359-4311 |
| Popis: | The exhaust gas of heavy duty diesel engines can provide an important heat source that may be used in a number of ways to provide additional power and improve overall engine efficiency. The sizing of a heat exchanger that can manage the heat load and still be of reasonable size and weight without excessive pressure drop is of significant importance especially for truck applications. This is the subject of the present work. To approach the problem, a total of five different configurations are investigated and a comparison of conventional and state of the art heat transfer enhancement technologies is included. Two groups of configurations are examined: (a) a classical shell and tube heat exchanger using staggered cross-flow tube bundles with smooth circular tubes, finned tubes and tubes with dimpled surfaces and (b) a cross-flow plate heat exchanger, initially with finned surfaces on the exhaust gas side and then with 10 ppi and 40 ppi metal foam material substituting for the fins. Calculations were performed, using established heat exchanger design methodologies and recently published data from the literature to size the aforementioned configurations. The solutions provided reduce the overall heat exchanger size, with the plate and fin type consisting of plain fins presenting the minimum pressure drop (up to 98% reduction compared to the other configurations), and the 40 ppi metal foam being the most compact in terms of size and weight. Durability of the solutions is another issue which will be examined in a future investigation. However, coupling of the exhaust heat exchanger after a particulate trap appears to be the most promising solution to avoid clogging from soot accumulation. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect