Poređenje nastajanja i razvoja kavitacionih oštećenja livenih i sinterovanih uzoraka na bazi bazalta
| Autor: | M. Dojčinović, Lj. Andrić, D. Radulović, M. Pavlović |
|---|---|
| Rok vydání: | 2019 |
| Předmět: |
basalt
kavitaciono oštećenje Materials science Scanning electron microscope cavitation damage 02 engineering and technology kavitaciona otpornost image analysis bazalt Composite material Basalt analiza slike 020502 materials lcsh:QE1-996.5 Sample mass 021001 nanoscience & nanotechnology mass loss cavitation resistance lcsh:Geology 0205 materials engineering Cavitation gubitak mase Ultrasonic sensor Cavitation erosion 0210 nano-technology |
| Zdroj: | Journal of Mining and Metallurgy. Section A: Mining, Vol 55, Iss 1, Pp 37-44 (2019) Journal of Mining and Metallurgy A: Mining |
| ISSN: | 2560-3159 1450-5959 |
| DOI: | 10.5937/jmma1901037p |
| Popis: | The paper examines the resistance to the effect of cavitation of glass-ceramics based on basalt. Two types of samples were investigated: cast and sintered samples based on basalt.The cavitation erosion test was performed using the ultrasonic vibratory method with a stationary sample. To measure the cavitation resistance, a change in sample mass in function of the cavitation time was monitored. The change in the morphology of the surface with the test time was followed by scanning electron microscopy. The level of the surface degradation of the samples was quantified using the image analysis. Samples were tested under the same conditions. A comparison of the properties of the resistance to the effect of cavitation was performed in relation to the calculated cavitation rates. The results showed the high degree of cavitation resistance of the tested samples and the possibility of their application in conditions of high cavitation loads. U radu je ispitivana otpornost na dejstvo kavitacije staklo-keramike na bazi bazalta. Ispitivane su dve vrste uzoraka: liveni i sinterovani uzorci na bazi bazalta. Kavitaciono erozioni test izveden je pomoću ultrazvučne vibracione metode sa stacionarnim uzorkom. Da bi se odredila kavitaciona otpornost praćena je promena mase uzoraka u funkciji vremena ispitivanja. Promena morfologije oštećenja površine uzoraka tokom ispitivanja praćena je skenirajućom elektronskom mikroskopijom. Nivo degradacije površine kvantifikovan je korišćenjem analize slike. Uzorci su ispitivani pod istim uslovima. Poređenje svojstava otpornosti na dejstvo kavitacije izvršeno je u odnosu na vrednosti kavitacionih brzina. Rezultati su pokazali visok stepen otpornosti ispitivanih uzoraka i mogućnost njihove primene u uslovima visokih kavitacionih opterećenja. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|