Simple and accurate quantification of BTEX in ambient air by SPME and GC-MS
Autor: | Lars Carlsen, Bulat Kenessov, Nassiba Baimatova, Olga P. Demyanenko, Marat Bektassov, Jacek A. Koziel |
---|---|
Rok vydání: | 2016 |
Předmět: |
Detection limit
Chromatography 010401 analytical chemistry Benzenesulfonates Benzene BTEX 010501 environmental sciences Xylenes Solid-phase microextraction 01 natural sciences Ethylbenzene Gas Chromatography-Mass Spectrometry 0104 chemical sciences Analytical Chemistry chemistry.chemical_compound chemistry Standard addition Calibration Benzene Derivatives Sample preparation Gas chromatography–mass spectrometry Solid Phase Microextraction 0105 earth and related environmental sciences Toluene |
Zdroj: | Talanta. 154 |
ISSN: | 1873-3573 |
Popis: | Benzene, toluene, ethylbenzene and xylenes (BTEX) comprise one of the most ubiquitous and hazardous groups of ambient air pollutants of concern. Application of standard analytical methods for quantification of BTEX is limited by the complexity of sampling and sample preparation equipment, and budget requirements. Methods based on SPME represent simpler alternative, but still require complex calibration procedures. The objective of this research was to develop a simpler, low-budget, and accurate method for quantification of BTEX in ambient air based on SPME and GC-MS. Standard 20-mL headspace vials were used for field air sampling and calibration. To avoid challenges with obtaining and working with 'zero' air, slope factors of external standard calibration were determined using standard addition and inherently polluted lab air. For polydimethylsiloxane (PDMS) fiber, differences between the slope factors of calibration plots obtained using lab and outdoor air were below 14%. PDMS fiber provided higher precision during calibration while the use of Carboxen/PDMS fiber resulted in lower detection limits for benzene and toluene. To provide sufficient accuracy, the use of 20mL vials requires triplicate sampling and analysis. The method was successfully applied for analysis of 108 ambient air samples from Almaty, Kazakhstan. Average concentrations of benzene, toluene, ethylbenzene and o-xylene were 53, 57, 11 and 14µgm(-3), respectively. The developed method can be modified for further quantification of a wider range of volatile organic compounds in air. In addition, the new method is amenable to automation. |
Databáze: | OpenAIRE |
Externí odkaz: |