EVALUATION OF THIN FILM COMPOSITE FORWARD OSMOSIS MEMBRANES: EFFECT OF POLYMER TYPE
| Autor: | Mustafa Al-Furaiji, Aya M. Kadhum, Zaidun Naji Abudi |
|---|---|
| Jazyk: | arabština |
| Rok vydání: | 2021 |
| Předmět: |
chemistry.chemical_classification
Materials science forward-osmosis Forward osmosis Polymer polysulfone polyethersulfone Engineering (General). Civil engineering (General) poly-amide Membrane chemistry interfacial polymerization Thin-film composite membrane polyacrylonitrile Composite material TA1-2040 |
| Zdroj: | Journal of Engineering and Sustainable Development, Vol 25, Iss 6, Pp 65-73 (2021) |
| ISSN: | 2520-0925 2520-0917 |
| Popis: | In the forward osmosis (FO) processes, the semipermeable membranes are used. These membranes are prepared from several types of polymers. In this research, the characterizations of each polymer were studied to conversance the effect of polymer type on the efficiency of the forward osmosis process. The prepared membrane’s roughness was investigated using atomic force microscopy (AFM) and scanning electron microscopy (SEM) to compare the formation of the TFC polyamide selective layer on each polymer type. Also, SEM images showed the distribution of pores on the prepared membrane. Contact angle (CA) measurements explained the hydrophilic and hydrophobic properties of membrane types. Finally, Energy dispersion spectrometry (EDS) was tested to determine the type, amount, and distribution of atoms in the prepared membranes. All of these characterizations proved that the Polysulfone (PSU) polymer was the best choice in the FO process. It can be proved that by test results, the PSU membrane gave the optimal water flux and salt rejection. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|