Structural transformations in austenitic stainless steel induced by deuterium implantation: irradiation at 100 K
| Autor: | Oleksandr Morozov, Volodymyr Zhurba, Ivan Neklyudov, Oleksandr Mats, Aleksandr Rud, Nikolay Chernyak, Viktoria Progolaieva |
|---|---|
| Rok vydání: | 2014 |
| Předmět: |
Materials science
Nano Express Hydride Austenitic stainless steel Metallurgy Analytical chemistry Crystal structure engineering.material Condensed Matter Physics Deuterium Structural transformations X-ray Ion implantation Materials Science(all) Martensite engineering TEM General Materials Science Irradiation Saturation (magnetic) TDS |
| Zdroj: | Nanoscale Research Letters |
| ISSN: | 1931-7573 |
| Popis: | Deuterium thermal desorption spectra were investigated on the samples of austenitic stainless steel 18Cr10NiTi preimplanted at 100 K with deuterium ions in the dose range from 3 × 10(15) to 5 × 10(18) D/cm(2). The kinetics of structural transformation development in the implantation steel layer was traced from deuterium thermodesorption spectra as a function of implanted deuterium concentration. At saturation of austenitic stainless steel 18Cr10NiTi with deuterium by means of ion implantation, structural-phase changes take place, depending on the dose of implanted deuterium. The maximum attainable concentration of deuterium in steel is C = 1 (at.D/at.met. = 1/1). The increase in the implanted dose of deuterium is accompanied by the increase in the retained deuterium content, and as soon as the deuterium concentration attains C ≈ 0.5 the process of shear martensitic structural transformation in steel takes place. It includes the formation of bands, body-centered cubic (bcc) crystal structure, and the ferromagnetic phase. Upon reaching the deuterium concentration C 0.5, the presence of these molecules causes shear martensitic structural transformations in the steel, which include the formation of characteristic bands, bcc crystal structure, and the ferromagnetic phase. At C ≥ 0.5, two hydride phases are formed in the steel, the decay temperatures of which are 240 and 275 K. The hydride phases are formed in the bcc structure resulting from the martensitic structural transformation in steel. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full text from SpringerLink