Process intensification of the ionoSolv pretreatment: effects of biomass loading, particle size and scale-up from 10 mL to 1 L
| Autor: | Pedro Verdía, Jason P. Hallett, Clementine L. Chambon, Paul S. Fennell |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2021 |
| Předmět: |
Bioalcohols
Science Biomass Context (language use) engineering.material 010402 general chemistry 01 natural sciences complex mixtures Article chemistry.chemical_compound Chemical engineering Lignin Miscanthus giganteus Multidisciplinary biology 010405 organic chemistry Chemistry Pulp (paper) biology.organism_classification Pulp and paper industry Biorefinery Ionic liquids 0104 chemical sciences engineering Slurry Medicine Particle size |
| Zdroj: | Scientific Reports, Vol 11, Iss 1, Pp 1-15 (2021) Scientific Reports |
| ISSN: | 2045-2322 |
| Popis: | The ionoSolv process is one of the most promising technologies for biomass pretreatment in a biorefinery context. In order to evaluate the transition of the ionoSolv pretreatment of biomass from bench-scale experiments to commercial scale, there is a need to get better insight in process intensification. In this work, the effects of biomass loading, particle size, pulp washing protocols and 100-fold scale up for the pretreatment of the grassy biomass Miscanthus giganteus with the IL triethylammonium hydrogen sulfate, [TEA][HSO4], are presented as a necessary step in that direction. At the bench scale, increasing biomass loading from 10 to 50 wt% reduced glucose yields from 68 to 23% due to re-precipitation of lignin onto the pulp surface. Omitting the pulp air-drying step maintained saccharification yields at 66% at 50 wt% loading due to reduced fiber hornification. 100-fold scale-up (from 10 mL to 1 L) improved the efficacy of ionoSolv pretreatment and increasing loadings from 10 to 20 wt% reduced lignin reprecipitation and led to higher glucose yields due to the improved heat and mass transfer caused by efficient slurry mixing in the reactor. Pretreatment of particle sizes of 1–3 mm was more effective than fine powders (0.18–0.85 mm) giving higher glucose yields due to reduced surface area available for lignin re-precipitation while reducing grinding energy needs. Stirred ionoSolv pretreatment showed great potential for industrialization and further process intensification after optimization of the pretreatment conditions (temperature, residence time, stirring speed), particle size and biomass loading. Pulp washing protocols need further improvement to reduce the incidence of lignin precipitation and the water requirements of lignin washing. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|