Multisine Calibration for Large-Signal Broadband Measurements
| Autor: | Y. Rolain, W. Van Moer |
|---|---|
| Přispěvatelé: | Electricity |
| Rok vydání: | 2008 |
| Předmět: |
Physics
microwave measurements Calibration (statistics) Acoustics ComputingMethodologies_IMAGEPROCESSINGANDCOMPUTERVISION Astrophysics::Instrumentation and Methods for Astrophysics nonlinear measurement system calibration Signal Signal-to-noise ratio ComputerApplications_MISCELLANEOUS Broadband Scattering parameters Electronic engineering multisines S-parameters Electrical and Electronic Engineering Instrumentation Electrical impedance Excitation |
| Zdroj: | IEEE Transactions on Instrumentation and Measurement. 57:1478-1483 |
| ISSN: | 1557-9662 0018-9456 |
| DOI: | 10.1109/tim.2008.917187 |
| Popis: | Classical calibration techniques use single-sine-wave measurements to maximize the signal-to-noise ratio (SNR). In large-signal characterization, the large number of instrument states to be calibrated results in unacceptably long calibration times. The proposed approach uses multisine excitation signals during the calibration to reduce the calibration time while having only a marginal influence on the measured device response. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|