Humidity micro switch based on humidity-sensitive polymers
| Autor: | Arndt Steinke, Gerald Gerlach, C. Bellmann, Thomas Frank |
|---|---|
| Rok vydání: | 2015 |
| Předmět: |
binary sensor switch
relative humidity zero-power boss structure hydrogel PVA-PAA chemistry.chemical_classification Materials science Silicon ddc:621.3 chemistry.chemical_element Humidity Polymer Electrical contacts Volume (thermodynamics) chemistry medicine Relative humidity ddc:620 binärer Sensorschalter relative Feuchte Nullstrom Nabenstruktur Hydrogel PVA-PAA Swelling medicine.symptom Composite material Saturation (chemistry) |
| Zdroj: | SPIE Proceedings. |
| ISSN: | 0277-786X |
| Popis: | We present recent results on a binary threshold sensor based on the binary zero-power sensor (BIZEPS) platform which is able to use the energy provided directly from the measured relative humidity of the ambient air to mechanically switch an electrical micro contact. This zero-power switch behavior is realized by using the humidity-sensitive volume swelling of a polymer layer as the detection element deflecting a mechanically deformable silicon boss structure, thus closing the electrical contacts of the switch. For the humidity-sensitive sensor switch considered here, a humidity-sensitive hydrogel blend of poly(vinyl alcohol) and poly(acryl acid) was used. The sensitive part affected by the measurand is completely separated from the electrical part, thus providing long-term stability. By using an inverse silicone stamping technique the polymer layer with a thickness of about 15 μm was patterned on test structures possessing a thin silicon flexure plate of 5 mm x 5 mm in size and 20 μm in thickness. Reproducible deformations of up to 15 … 24 μm has been measured. Investigations of the swelling kinetics showed for several discrete relative humidity values a saturation of the water load. The time to reach this saturation state is reduced from 5 hours down to approx. 20 min by increasing the relative humidity beyond the threshold value of 70% r.H. A significant influence of the temperature to the humidity load could not be observed. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|