The current perspective of the PA 1957 gas well pillar study and its implications for longwall gas well pillars
| Autor: | Daniel Su, Christopher Mark, Peter Zhang |
|---|---|
| Rok vydání: | 2021 |
| Předmět: |
lcsh:TN1-997
Pennsylvania 1957 gas well pillar study Gas well pillar 0211 other engineering and technologies Abutment Energy Engineering and Power Technology 02 engineering and technology 020401 chemical engineering Mining engineering Geochemistry and Petrology Coal 0204 chemical engineering Retreat mining lcsh:Mining engineering. Metallurgy 021101 geological & geomatics engineering Safety factor business.industry Coal mining Longwall mining Subsidence Geotechnical Engineering and Engineering Geology Overburden Room-and-pillar mining business Geology |
| Zdroj: | International Journal of Mining Science and Technology, Vol 31, Iss 1, Pp 117-126 (2021) |
| ISSN: | 2095-2686 |
| DOI: | 10.1016/j.ijmst.2020.12.014 |
| Popis: | Many states rely upon the Pennsylvania 1957 Gas Well Pillar Study to evaluate the coal barrier surrounding gas wells. The study included 77 gas well failure cases that occurred in the Pittsburgh and Freeport coal seams over a 25-year span. At the time, coal was mined using the room-and-pillar mining method with full or partial pillar recovery, and square or rectangle pillars surrounding the gas wells were left to protect the wells. The study provided guidelines for pillar sizes under different overburden depths up to 213 m (700 ft). The 1957 study has also been used to determine gas well pillar sizes in longwall mines since longwall mining began in the 1970 s. The original study was developed for room-and-pillar mining and could be applied to gas wells in longwall chain pillars under shallow cover. However, under deep cover, severe deformations in gas wells have occurred in longwall chain pillars. Presently, with a better understanding of coal pillar mechanics, new insight into subsidence movements induced by retreat mining, and advances in numerical modeling, it has become both critically important and feasible to evaluate the adequacy of the 1957 study for longwall gas well pillars. In this paper, the data from the 1957 study is analyzed from a new perspective by considering various factors, including overburden depth, failure location, failure time, pillar safety factor (SF), and floor pressure. The pillar SF and floor pressure are calculated by considering abutment pressure induced by full pillar recovery. A statistical analysis is performed to find correlations between various factors and helps identify the most significant factors for the stability of gas wells influenced by retreat mining. Through analyzing the data from the 1957 study, the guidelines for gas well pillars in the 1957 study are evaluated for their adequacy for room-and-pillar mining and their applicability to longwall mining. Numerical modeling is used to model the stability of gas wells by quantifying the mining-induced stresses in gas well casings. Results of this study indicate that the guidelines in the 1957 study may be appropriate for pillars protecting conventional gas wells in both room-and-pillar mining and longwall mining under overburden depths up to 213 m (700 ft), but may not be sufficient for protective pillars under deep cover. The current evaluation of the 1957 study provides not only insights about potential gas well failures caused by retreat mining but also implications for what critical considerations should be taken into account to protect gas wells in longwall mining. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|