| Popis: |
The Deepwater Horizon (DWH) drilling unit explosion above the Macondo oil well on 20 April 2010 caused the release of approximately 4.9 million barrels (779 million L) of oil into the Gulf of Mexico. As part of a larger spill response and clean-up effort, approximately 1.84 million gallons (6.81 million L) of chemical dispersants COREXIT™ EC9500A and COREXIT™ EC9527A were applied to the resultant oil slicks through spraying on the water surface by plane and by vessel and through injection at the release source near the seabed. The GuLF STUDY is investigating the health effects of workers involved in the oil spill response and clean-up after the DWH explosion, and estimates of possible exposure to chemical dispersants were needed. Exposures were estimated to the volatile components of COREXIT™ EC9500A [petroleum distillates, hydrotreated light, and propylene glycol (PG)] and of COREXIT™ EC9527A [2-butoxyethanol (2-BE) and PG] using two of AIHA IHMOD2.0© mathematical modeling tools along with the dispersants’ chemical and physical properties. Monte Carlo simulations were used to reflect uncertainty in input parameters with both the two-box, constant emission model and the near and mid field plume model for indoor and outdoor activities, respectively. Possible exposure scenarios considered various evaporation rates, sizes of the dispersant pool, wind speeds, and ventilation rates. For the two-box model, mean near field exposure estimates to 2-BE ranged from 0.9 to 5.7 ppm, while mean far field estimated exposures ranged from 0.3 to 3.5 ppm. Estimates of mean near field plume model exposures ranged from 0.01 to 3.7 ppm at 2.5 ft from the source, and |
