Power Decoupling Method for Voltage Source Inverters Using Grid Voltage Modulated Direct Power Control in Unbalanced System
| Autor: | Zhen Gong, Chengxi Liu, Yonghao Gui, Filipe Faria da Silva, Claus Leth Bak |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2023 |
| Předmět: |
power decoupling
Grid-voltage-modulated direct power control (GVM-DPC) Reactive power unbalanced system Voltage voltage source inverter (VSI) voltage source inverter Transient analysis Power system dynamics Voltage control Couplings grid-voltage-modulated direct power control Electrical and Electronic Engineering Band-pass filters |
| Zdroj: | Gong, Z, Liu, C, Gui, Y, Silva, F M F D & Bak, C L 2023, ' Power Decoupling Method for Voltage Source Inverters Using Grid Voltage Modulated Direct Power Control in Unbalanced System ', IEEE Transactions on Power Electronics, vol. 38, no. 3, pp. 3084-3099 . https://doi.org/10.1109/TPEL.2022.3220436 |
| DOI: | 10.1109/TPEL.2022.3220436 |
| Popis: | The grid voltage modulated direct power control (GVM-DPC) is a novel power regulation method for grid-connected voltage source inverters (VSI). However, interactions between real and reactive powers still exist in GVM-DPC under unbalanced grid voltage condition, which may deteriorate its transient performance. This article proposes a power decoupling method for GVM-DPC-based VSI in unbalanced systems based on the dynamic feedforward power compensation strategy, which can reduce the coupling magnitudes of real and reactive powers in the transient stages. First, the power coupling mechanism of positive and negative sequence real and reactive powers of VSI under the unbalanced voltage condition is analyzed. Then, the power coupling magnitudes (PCM) are derived according to relationships among the positive sequence components of real power, reactive power and point of common coupling (PCC) voltages. Next, the PCM are compensated into the GVM-DPC for the better decoupling performance. Furthermore, a stability analysis of the proposed control system is studied based on the impedance model, and a comparison with the traditional power decoupling method based on virtual impedance is conducted to show the superiority of the proposed method. Finally, simulations, hardware-in-loop test and experiment are conducted to validate the effectiveness of the proposed method. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|