Adhesion Strength of Biomass Ash Deposits
| Autor: | Yashasvi Laxminarayan, Peter Arendt Jensen, Hao Wu, Martin Bøjer, Flemming Jappe Frandsen, Peter Glarborg |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2016 |
| Předmět: | |
| Zdroj: | Laxminarayan, Y, Jensen, P A, Wu, H, Bøjer, M, Jappe Frandsen, F & Glarborg, P 2016, Adhesion Strength of Biomass Ash Deposits . in Proceedings of 24th European Biomass Conference & Exhibition . 24th European Biomass Conference & Exhibition, Amsterdam, Netherlands, 06/06/2016 . https://doi.org/10.5071/24thEUBCE2016-2BV.1.49 Technical University of Denmark Orbit Laxminarayan, Y, Jensen, P A, Wu, H, Bøjer, M, Jappe Frandsen, F & Glarborg, P 2015, Adhesion Strength of Biomass Ash Deposits . in Proceedings of The Nordic Flame Days 2015 . The Nordic Flame Days 2015, Copenhagen, Denmark, 06/10/2015 . |
| DOI: | 10.5071/24thEUBCE2016-2BV.1.49 |
| Popis: | Ash deposition on boiler surfaces is a major problem encountered during biomass combustion. Ash deposition adversely influences the boiler efficiency, may corrode heat transfer surfaces, and may even completely block flue gas channels in severe cases, causing expensive unscheduled boiler shutdowns. Therefore, timely removal of ash deposits is essential for optimal boiler operation. In order to improve the qualitative and quantitative understanding of deposit shedding in boilers, this study investigates the shear adhesion strength of biomass ash deposits on superheater tubes. Artificial biomass ash deposits were prepared on superheater tubes and sintered in an oven at temperatures up to 1000 °C. Subsequently, the deposits were sheared off by an electrically controlled arm, and the corresponding adhesion strength was measured. The results reveal the effect of temperature, ash/deposit composition, sintering duration, and steel type on the adhesion strength. Proceedings of the 24th European Biomass Conference and Exhibition, 6-9 June 2016, Amsterdam, The Netherlands, pp. 756-761 |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|