On the active deformations of hybrid specimens
Autor: | Stefano Botturi, A. Massai, Mario Rosario Chiarelli, Jan Kunzmann, Angelo Colbertaldo, D. G. Romano, Vincenzo Binante |
---|---|
Rok vydání: | 2016 |
Předmět: |
Macro Fiber Composite
Finite element method Materials science Hybrid specimens business.industry Composite number Aerospace Engineering Torsion (mechanics) Experimental data 02 engineering and technology Structural engineering 021001 nanoscience & nanotechnology Curvature Smart material Piezoelectricity 020303 mechanical engineering & transports 0203 mechanical engineering Composite substrate Finite element method Composite substrate Hybrid specimens Laser technique Macro Fiber Composite Macro Laser technique 0210 nano-technology business |
Zdroj: | Aircraft Engineering and Aerospace Technology. 88:676-687 |
ISSN: | 1748-8842 |
DOI: | 10.1108/aeat-02-2015-0058 |
Popis: | Purpose The purpose of this study concerns numerical studies and experimental validation of the mechanical behavior of hybrid specimens. These kinds of composite specimens are made up of thin carbon and glass substrates on which some Macro Fiber Composite® (MFC) piezoelectric patches are glued. A proper design and manufacturing of the hybrid specimens as well as testing activities have been performed. The research activity has been carried out under the FutureWings project, funded by the European Commission within the 7th Framework. Design/methodology/approach The paper describes the basic assumptions made to define specimen geometries and to carry out experimental tests. Finite element (FE) results and experimental data (laser technique measurements) have been compared: it shows very good agreement for the displacements’ distribution along the specimens. Findings Within the objectives of the project, the study of passive and active deformation characteristics of the hybrid composite material has provided reference technical data and has allowed for the correct adaptation of the FE models. More in particular, using the hybrid specimens, both the bending deformations and the torsion deformations have been studied. Practical implications The deformation capability of the hybrid specimens will be used in the development of prototypical three-dimensional structures, that, through the electrical control of the MFC patches, will be able to change the curvature of their cross section or will be able to change the angle of torsion along their longitudinal axis. Originality/value The design of nonstandard specimens and the tests executed represent a novelty in the field of structures using piezoelectric actuators. The numerical and experimental data of the present research constitute a small step forward in the field of smart materials technology. |
Databáze: | OpenAIRE |
Externí odkaz: |