Enhancement of Single-Lap Composite Joints Strength at Different Temperatures
| Autor: | Alaattin Aktaş, Yusuf Cunedioglu, Bertan Beylergil |
|---|---|
| Přispěvatelé: | Beylergil, Bertan -- 0000-0002-3204-6746, [Aktas, Alaattin] Istanbul Univ, Fac Engn, Dept Mech Engn, TR-34320 Istanbul, Turkey -- [Beylergil, Bertan -- Cunedioglu, Yusuf] Nigde Univ, Fac Engn, Dept Mech Engn, TR-51245 Nigde, Turkey, 0-Belirlenecek |
| Jazyk: | angličtina |
| Rok vydání: | 2012 |
| Předmět: |
Single-lap joint
Materials science Static strength Composite number Glass fiber Bent molecular geometry Surfaces and Interfaces General Chemistry Atmospheric temperature range Surfaces Coatings and Films fiber pinning Mechanics of Materials elevated temperature Ultimate tensile strength Materials Chemistry composite Composite material adhesive damage |
| Popis: | WOS: 000306743800011 In this study a novel reinforcing method was examined for glass-fiber reinforced composites consisted of inter-adherend glass fibers which acted as pins to pierce the composite adherend. Two types of inter-adherends were investigated. One of the types involved fibers which acted as pins (type B), and the other type was made up of pin like fibers with bent edges which stuck to the surface of the adherend (type C). Static tensile tests were performed on both types of single-lap joints (SLJ) and for joints without inter-adherend fibers (type A) at four different temperatures (20, 40, 60 and 80 degrees C) in accordance with ASTM standards. The results showed that the fibers improved the ultimate static strength of the single-lap joints over the entire temperature range. (C) Koninklijke Brill NV, Leiden, 2012 |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|