Pin Hole Discharge Creation in Na2SO4 Water Solutions
| Autor: | František Krčma, Zdenka Kozáková, Rodica Serbanescu, L. Hlochová, L. Hlavatá |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2013 |
| Předmět: |
Electrolysis
Chemistry Brush discharge pin hole discharge discharge in liquids discharge breakdown General Engineering Analytical chemistry Diaphragm (mechanical device) Dielectric Dielectric barrier discharge Conductivity law.invention law lcsh:TA1-2040 Partial discharge Breakdown voltage lcsh:Engineering (General). Civil engineering (General) |
| Zdroj: | Acta Polytechnica, Vol 53, Iss 2 (2013) |
| ISSN: | 1805-2363 1210-2709 |
| Popis: | This work deals with the diaphragm discharge generated in water solutions containing Na2SO4 as a supporting electrolyte. The solution conductivity was varied in the range of 270 ÷ 750 µScm-1. The batch plasma reactor with volume of 100 ml was divided into two electrode spaces by the Shapal-MTM ceramics dielectric barrier with a pin-hole (diameter of 0.6 mm). Three variable barrier thicknesses (0.3; 0.7 and 1.5 mm) and non-pulsed DC voltage up to 2 kV were used for the discharge creation. Each of the current–voltage characteristic can be divided into three parts: electrolysis, bubble formation and discharge operation. The experimental results showed that the discharge ignition moment in the pin-hole was significantly dependent on the dielectric diaphragm thickness. Breakdown voltage increases with the increase of the dielectric barrier thickness. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|