Physical and mechanical properties of processed pea, bean, spinach and radish seeds
| Autor: | Mladen Ivanišević, Dragi Radomirovic, Krstan Kešelj, Ondrej Ponjičan, Milivoj Radojčin |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2018 |
| Předmět: |
0106 biological sciences
2. Zero hunger Materials science slope of the curve biology vegetable seeds deformation modulus of elasticity 04 agricultural and veterinary sciences mechanical properties biology.organism_classification 040401 food science 01 natural sciences physical properties rupture force Horticulture 0404 agricultural biotechnology 010608 biotechnology Spinach |
| Zdroj: | Journal on Processing and Energy in Agriculture (2018) 22(4):196-201 |
| ISSN: | 1821-4487 |
| Popis: | The physical and mechanical properties of pea, bean, spinach and radish seeds, both processed and packaged for sale, were examined under laboratory conditions. The experiment was conducted in order to determine the initial parameters necessary for adjusting the harvester mode so as to reduce the seed damage and losses. Therefore, the results obtained are of immense importance to the selection of appropriate feeds, i.e. the metering mechanism, and setting the operating mode. The following basic physical properties of seeds were measured: dimensions, shape, moisture content, mass of 1000 seeds, the bulk density and the angle of static friction. Mechanical properties were determined by measuring the slope of the load depending on the strain. The slope of the curve load/deflection was determined in three intervals. The first slope of the curve was measured in the area of elastic deformation, the second slope in the area of elastic/plastic deformation, and the third for the rupture point. On the basis of the mean value of the cross-section, the destruction stress and the secant modulus of elasticity were calculated at the point of destruction. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|