A Novel Method for Investigating Photovoltaic Module Degradation
Autor: | Pape Alioune Ndiaye, Vincent Sambou, Abdessamad Kobi, Ababacar Ndiaye, Abdérafi Charki, Cheikh M. F. Kébé |
---|---|
Přispěvatelé: | Laboratoire en Sûreté de Fonctionnement, Qualité & Organisation (LASQUO), Université d'Angers (UA)-ISTIA |
Rok vydání: | 2013 |
Předmět: |
Engineering
Standardization 020209 energy short circuit current 02 engineering and technology 7. Clean energy Automotive engineering Degradation [SPI]Engineering Sciences [physics] Energy(all) PV module 0202 electrical engineering electronic engineering information engineering Standard test standard test conditions business.industry Open-circuit voltage Photovoltaic system Electrical engineering open circuit voltage 021001 nanoscience & nanotechnology Power (physics) 0210 nano-technology business Short circuit Voltage Degradation (telecommunications) |
Zdroj: | Energy Procedia Energy Procedia, Elsevier, 2013, 36, pp.1222-1231. ⟨10.1016/j.egypro.2013.07.138⟩ |
ISSN: | 1876-6102 |
DOI: | 10.1016/j.egypro.2013.07.138 |
Popis: | International audience; This paper proposes a method for the detection and assessment of the degradation of the photovoltaic modules electrical characteristics such as short-circuit current (Isc), open-circuit voltage (Voc) and maximum output power (Pmax). This work presents a standardization method for measurements of these characteristics in real conditions. Standardization is bringing back the measurements in real conditions to the corresponding values in standard test conditions (STC). Thus the standardized values of short-circuit current (Isc,stc), the open-circuit voltage (Voc,stc) and the maximum output power (Pmax) are compared with reference values corresponding to the first putting service of module or the manufacturer's data as in our case. The data collected on a platform of measurements installed at the University of Dakar in Senegal are used to validate our approach. A Period of one operation year of the PV module is considered. After one year of module operation, we note an average degradation of 10% for the short-circuit current, 2% for the open-circuit voltage. For the maximum output-power no degradation is yet detected at this stage. |
Databáze: | OpenAIRE |
Externí odkaz: |