Stressed-deformed state of mountain rocks in elastic stage and between elasticity
Autor: | A.M. Samedov, Viktoriia Viktorivna Vapnichna, V.O. Shlapak, O.M. Sidorov |
---|---|
Jazyk: | angličtina |
Rok vydání: | 2017 |
Předmět: |
Materials science
lcsh:Computer engineering. Computer hardware Stress–strain curve deformation beyond elasticity elastic stage of work lcsh:TK7885-7895 Mechanics weakening of rocks Compression (physics) Brittleness stresses lcsh:TA1-2040 Tension (geology) Ultimate tensile strength superheated water vapor fluidity point Deformation (engineering) Elasticity (economics) Superheated water lcsh:Engineering (General). Civil engineering (General) |
Zdroj: | Vìsnik Žitomirsʹkogo Deržavnogo Tehnologìčnogo Unìversitetu: Tehnìčnì Nauki, Vol 2, Iss 80 Т.1, Pp 181-188 (2017) |
ISSN: | 1728-4260 |
Popis: | The problems of the stress-strain state of rocks in the elastic stage and beyond the elastic limits, and the ways of schematizing the tension and compression diagrams were reviewed in the article. To simplify calculations outside the elastic range, the tension (compression) diagrams are usually schematized, i.e. are replaced by curved smooth lines having a fairly simple mathematical expression and at the same time well coinciding with the experimentally obtained diagrams. When diagram is to be schematized, it is necessary to take a constant temperature of superheated water steam if a rock test is planned in a relaxed form. Note that when the diagram is schematizing, the difference between the limits of proportionality and fluidity is erased. This allows the limit of proportionality to be considered the limit of fluidity. Schematicization can be carried out in the area where the tensile strength (compression) is planned to be destroyed with the established weakening of rocks by exposure to water steam or chemical reagents. Samples of rocks in natural form were tested and weakened by means of superheated water steam (220 °C and more) and chemical reagents for tension and compression. The data are obtained, the diagrams of deformation are constructed and schematized in the elastic stage and beyond the elastic limit. Based on the schematic diagrams of deformation, the components of stress and strain were composed in the elastic stage and beyond the elastic limit. It is established in the publication that rocks under compression and stretching deform, both within the elastic stage, and beyond the limits of elasticity. This could be seen when the samples, both in natural and in weakened state, with superheated water steam (more than 220 °C) or chemical reagents were tested. In their natural form, they are mainly deformed within the elastic stage and are destroyed as a brittle material, and in a weakened form they can deform beyond the elastic stage and destroy as a plastic material. In the elastic stage, the link between stress and strain is linear. |
Databáze: | OpenAIRE |
Externí odkaz: |
Pro tento záznam nejsou dostupné žádné jednotky.