Experimental characterization, modelling and compensation of temperature effects in optotunable lenses

Autor: Marrakchi, Y., Barcala, Xoana, Gambra, Enrique, Martínez-Ibarburu, I., Dorronsoro, Carlos, Sawides, L.
Přispěvatelé: Comunidad de Madrid
Rok vydání: 2023
Předmět:
Zdroj: Scientific Reports. 13
ISSN: 2045-2322
DOI: 10.1038/s41598-023-28795-7
Popis: 15 pags., 10 figs., 1 tab.
Most tunable lenses (TLs) are affected by deviations in optical power induced by external temperature changes or due to internal heating while in use. This study proposes: (1) An experimental characterization method to evaluate the magnitude of the optical power deviations due to internal temperature shifts; (2) three different mathematical models (experimental, polynomial, and optimized) to describe the response of the lens with temperature; (3) predictions of the internal temperature shifts while using the lens in time frames of minutes, seconds, and milliseconds and; (4) a real time optical power compensation tool based on the implementation of the models on a custom voltage electronic driver. The compensation methods were successfully applied to two TL samples in static and dynamic experiments and in hysteresis cycles. After 40 min at a static nominal power of 5 diopters (dpt), the internal temperature exponentially increased by 17 °C, producing an optical power deviation of 1.0 dpt (1.5 dpt when the lens cools down), representing a 20% distortion for heating and 30% for cooling. Modelling and compensation reduced the deviations to 0.2 dpt when heating (0.35 dpt when cooling) and the distortions to 4% and 7%. Similar levels of improvement were obtained in dynamic and hysteresis experiments. Compensation reduced temperature effects by more than 75%, representing a significant improvement in the performance of the lens.
XB and IM acknowledge fnancial support from Comunidad de Madrid Doctorado Industrial IND2017/ BMD-7670.
Databáze: OpenAIRE
Externí odkaz: