The effect of 2D-MoS2 doped polypyrrole coatings on brass corrosion
| Autor: | Abdurrahman Asan, Gülden Asan, Hüseyin Çelikkan |
|---|---|
| Přispěvatelé: | [Belirlenecek], Hitit Üniversitesi, Teknik Bilimler Meslek Yüksekokulu, Mülkiyet Koruma ve Güvenlik Bölümü |
| Jazyk: | angličtina |
| Rok vydání: | 2020 |
| Předmět: |
Conductive polymer
Tafel equation 2D-MoS2 Organic Chemistry Polypyrrole Chronoamperometry engineering.material Brass Analytical Chemistry Corrosion Inorganic Chemistry chemistry.chemical_compound chemistry Chemical engineering Coating visual_art visual_art.visual_art_medium engineering Polarization (electrochemistry) Spectroscopy |
| Popis: | Conductive polymers have an important potential against the corrosion applications because they are highly resistant to chemicals besides they have homogeneous coating properties and transport metals to more noble regions. However, the major disadvantage of conductive polymers such as polypyrrole (PPy) is their low mechanical strength. In this study, the doping effect of MoS2 into the PPy coatings by the electropolymerization of polypyrrole (PPy) and exfoliated MoS2 on the corrosion of brass was investigated. The corrosion protection of these coatings were determined by measuring the corrosion rates with Tafel polarization method in 0.1 M H2SO4 media. PPy and MoS2 doped PPy (MoS2@PPy) coatings were successfully obtained by the use of chronoamperometry technique in 0.2 M H2C2O4 solutions with 0.2 M pyrrole and various concentrations of MoS2. It was observed that MoS2@PPy coatings were homogeneously coated without and with all MoS2 concentrations on the metal surface and well adhered to the brass surface, but MoS2@PPy coating with 25 ppm MoS2 showed the best corrosion protection. The surface and chemical characterizations of the coatings were performed by SEM-EDS. (C) 2019 Elsevier B.V. All rights reserved. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|