Fatigue crack growth in a compressor stage of a turbofan engine by FEM-DBEM approach
| Autor: | M. Perrella, Venanzio Giannella, Valery Shlyannikov |
|---|---|
| Přispěvatelé: | Giannella, Venanzio, Perrella, Michele, Shlyannikov, Valery N. |
| Jazyk: | angličtina |
| Rok vydání: | 2018 |
| Předmět: |
Materials science
business.industry 0211 other engineering and technologies Strain energy density function 02 engineering and technology Structural engineering Paris' law Finite element method Turbofan Stress field 020303 mechanical engineering & transports 0203 mechanical engineering Fracture (geology) FEM-DBEM fatigue crack-growth turbine vane load spectrum business Boundary element method Gas compressor 021101 geological & geomatics engineering Earth-Surface Processes |
| Popis: | In this work, the fatigue crack-growth process in a rotating disk of an aircraft gas turbine engine has been simulated. The considered crack nucleated in the attachment between a blade and the disk of a compressor stage, both made of a two-phase titanium alloy. The fatigue crack-growth process of such crack has been simulated by means of two codes, ABAQUS and BEASY, based on Finite Element Method (FEM) and Dual Boundary Element Method (DBEM) respectively. In particular, a variant of the submodelling technique, based on the superposition principle, has been used for coupling the two codes in order to exploit simultaneously their peculiar strength points. The FEM code has been used to compute the global stress field whereas the DBEM code has been used to calculate the fracture parameters, useful to predict the crack-growth evolution. The J-integral method and the Minimum Strain Energy Density Criterion (MSED) have been used for calculating K values and predicting crack kinking respectively. In this work, the FEM-DBEM crack path is compared with both the path obtained by a full-scale experimental test and the path predicted via a full FEM approach: having in an initial stage considered the only centrifugal load, with no allowance e.g. for the fluid pressure on the blades and for the blade dynamic behaviour, some discrepancies are found between numerical and experimental results. The computational advantages of the proposed submodelling approach are highlighted, in addition to a preliminary fatigue assessment provided for the considered compressor disk (further analyses are under development). |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|