An Investigation on the Sandwich Panels with Flexible and Toughened Adhesives under Flexural Loading

Autor: Kara, Emre, Şura Karakuzu, Geylan, Ahmet F., Demir, Metehan, Koç, Kadir, Aykul, Halil
Jazyk: angličtina
Rok vydání: 2015
Předmět:
DOI: 10.5281/zenodo.1100699
Popis: The material selection in the design of the sandwich structures is very crucial aspect because of the positive or negative influences of the base materials to the mechanical properties of the entire panel. In the literature, it was presented that the selection of the skin and core materials plays very important role on the behavior of the sandwich. Beside this, the use of the correct adhesive can make the whole structure to show better mechanical results and behavior. In the present work, the static three-point bending tests were performed on the sandwiches having an aluminum alloy foam core, the skins made of three different types of fabrics and two different commercial adhesives (flexible polyurethane and toughened epoxy based) at different values of support span distances by aiming the analyses of their flexural performance in terms of absorbed energy, peak force values and collapse mechanisms. The main results of the flexural loading are: force-displacement curves obtained after the bending tests, peak force and absorbed energy values, collapse mechanisms and adhesion quality. The experimental results presented that the sandwiches with epoxy based toughened adhesive and the skins made of S-Glass Woven fabrics indicated the best adhesion quality and mechanical properties. The sandwiches with toughened adhesive exhibited higher peak force and energy absorption values compared to the sandwiches with flexible adhesive. The use of these sandwich structures can lead to a weight reduction of the transport vehicles, providing an adequate structural strength under operating conditions.
{"references":["W. J. Cantwell, G. R. Villanueva, \"The high velocity impact response of\ncomposite and FML-reinforced sandwich structures\", Composite\nScience and Technology, vol. 64, pp. 35-54, 2004.","J. Banhart, \"Manufacture, characterisation and application of cellular\nmetals and metal foams\", Progress in Material Science, vol. 46, no. 6,\npp. 559–632, 2001.","H. P. Degischer, B. Kriszt, Handbook of cellular metals: production,\nprocessing, applications. Weinheim: Wiley-VCH Verlag, 2002, ch. 4.","V. Crupi, G. Epasto, E. Guglielmino, \"Comparison of aluminium\nsandwiches for lightweight ship structures: honeycomb vs. foam\",\nMarine Structures, vol. 30, pp. 74 – 96, 2013.","E. Kara, V. Crupi, G. Epasto, E. Guglielmino, H. Aykul, \"Low velocity\nimpact response of glass fiber reinforced aluminium foam sandwich\", in\nProc. of 15th European Conference on Composite Materials (ECCM15),\nVenice, 2012, pp. 1-8.","G. Reyes, \"Mechanical behavior of thermoplastic FML-reinforced\nsandwich panels using an aluminum foam core: experiments and\nmodelling\", Journal of Sandwich Structures and Materials, vol. 12, pp.\n81 – 96, 2010.","J. Banhart, C. Schmoll, U. Neumann, \"Light-weight aluminium foam\nstructures for ships\", in Proc. Conf. Materials in Oceanic Environment\n(Euromat '98), Lisbon, 1998, vol. 1, pp. 55–63.","L. J. Gibson, M. F. Ashby, Cellular solids: structure and properties.\nOxford: Pergamon Press, 1997.","M. F. Ashby, A. G. Evans, N. A. Fleck, L. J. Gibson, J. W. Hutchinson,\nH. N. G. Wadley, Metal foams: a design guide. Boston: Butterworth-\nHeinemann, 2000.\n[10] T. M. McCormack, R. Miller, O. Kesler, L. J. Gibson, \"Failure of\nsandwich beams with metallic foam cores\", International Journal of\nSolids and Structures, vol. 38, pp. 4901–4920, 2001.\n[11] H. Bart-Smith, J. Hutchinson, A. Evans, \"Measurement and analysis of\nthe structural performance of cellular metal sandwich construction\",\nInternational Journal of Mechanical Sciences, vol. 43, no. 8, pp. 1945–\n1963, 2001.\n[12] J. Yu, E. Wang, J. Li, Z. Zheng, \"Static and low-velocity impact\nbehaviour of sandwich beams with closed-cell aluminum foam core in\nthree-point bending\", International Journal of Impact Engineering, vol.\n35 , no. 8, pp. 885–894, 2008.\n[13] K. Mohan, Y. T. Hon, S. Idapalapati, H. P. Seow, \"Failure of sandwich\nbeams consisting of alumina face and aluminum foam core in bending\",\nMaterials Science and Engineering:A, vol. 409, pp. 292–301, 2005.\n[14] C. Chen, A. M. Harte, N. A. Fleck, \"The plastic collapse of sandwich\nbeams with a metallic foam core\", International Journal of Mechanical\nSciences, vol. 43, no. 6, pp. 1483–1506, 2001.\n[15] Y. Shenhar, Y. Frostig, E. Altus, \"Stresses and failure patters in the\nbending of sandwich beams with transversely flexible cores and\nlaminated composite skins\", Composite Structures, vol. 35, pp. 143–152,\n1996.\n[16] M. Kampner, J. L. Grenestedt, \"On using corrugated skins to carry shear\nin sandwich beams\", Composite Structures, vol. 85, pp. 139–148, 2007.\n[17] V. L. Tagarielli, N. A. Fleck, V. S. Deshpand, \"The collapse response of\nsandwich beams with aluminium face sheets and a metal foam core in\nthree-point bending\", in Proceedings of cellular metals and metal\nfoaming technology (MetFoam2003), Berlin, 2003, pp. 381–386.\n[18] H. Bart-Smith, J. W. Hutchinson, N. A. Fleck, A. G. Evans, \"Influence\nof imperfections on the performance of metal foam core sandwich\npanels\", International Journal of Solids and Structures, vol. 39, pp.\n4999–5012, 2002.\n[19] O. Kesler, L. J. Gibson, \"Size effects in metallic foam core sandwich\nbeams\", Materials Science and Engineering:A, vol. 326, no. 2, pp. 228–\n234, 2002.\n[20] C. A. Steeves, N. A. Fleck, \"Collapse mechanism of sandwich beams\nwith composite faces and a foam core, loaded in three-point bending.\nPart I: analytical models and minimum weight design\", International\nJournal of Mechanical Sciences, vol. 46, pp. 561–583, 2004.\n[21] V. Crupi, R. Montanini, \"Aluminium foam sandwiches collapse modes\nunder static and dynamic three-point bending\", International Journal of\nImpact Engineering, vol. 34, pp. 509 – 521, 2007.\n[22] J. Baumeister, J. Banhart, M. Weber, \"Aluminium foams for transport\nindustry\", Materials & Design, vol. 18, pp. 217-220, 1997."]}
Databáze: OpenAIRE
Externí odkaz: