CERN’s Linac4 cesiated surface H− source

Autor: M. Paoluzzi, D. Steyaert, N. David, Serge Mathot, Stefan Briefi, M. Haase, D. Fink, Alessandra Lombardi, Davide Aguglia, Marco Garlaschè, C. Machado, N. Thaus, M. O'Neil, R. Scrivens, I. Koszar, Roberto Guida, S. Mattei, Ursel Fantz, Alessandro Dallocchio, J. D. Hansen, A. Jones, Alexej Grudiev, G. Voulgarakis, E. Chaudet, Akiyoshi Hatayama, F. Di Lorenzo, Y. Coutron, P. Moyret, Sebastien Bertolo, U. Raich, Taneli Kalvas, K. Nishida, J. Lettry, Federico Roncarolo, A. Butterworth, Jean-Baptiste Lallement, Cristiano Mastrostefano
Přispěvatelé: Faircloth, Dan
Jazyk: angličtina
Rok vydání: 2017
Předmět:
Zdroj: AIP Conference Proceedings
DOI: 10.1063/1.4995722
Popis: Linac4 cesiated surface H− sources are routinely operated for the commissioning of the CERN’s Linac4 and on an ion source test stand. Stable current of 40-50 mA are achieved but the transmission through the LEBT of 80% was below expectations and triggered additional beam simulation and characterization. The H− beam profile is not Gaussian and emittance measurements are larger than simulation. The status of ongoing development work is described; 36 mA H− and 20 mA D− beams were produced with a 5.5 mm aperture cesiated surface ion source. The emittances measured at the test stand are presented. During a preliminary test, the Linac4 proton source delivered a total beam intensity of 70 mA (p, H2+, H3+). peerReviewed
Databáze: OpenAIRE