SAW RFID Devices Using Connected IDTs as an Alternative to Conventional Reflectors for Harsh Environments
| Autor: | A. Shvetsov, Hamid M'Jahed, Sergei Zhgoon, Jeremy Streque, Pascal Nicolay, Hugo Chambon, Omar Elmazria, Sami Hage-Ali, Cecile Floer |
|---|---|
| Přispěvatelé: | Institut Jean Lamour (IJL), Université de Lorraine (UL)-Institut de Chimie du CNRS (INC)-Centre National de la Recherche Scientifique (CNRS), CTR - Carinthian Tech Research, National Research University, Moscow Power Engineering Institute, This work was supported by Direction Générale de l’Armement (DGA), the ANR project 'SAWGOOD' (ANR-18-CE42-0004-01), the ANR project 'SALSA' (ANR-15-CE08-0015-05), the French PIA project 'Lorraine Université d’Excellence' (ANR-15-IDEX-04-LUE), the CPER Mat-DS, the Ministry of Science and Education of Russian Federation 8.6108.2017/6.7 and by the COMET K1 centre ASSIC., IMPACT N4S, ANR-18-CE42-0004,SAWGOOD,Dispositifs sans fils étirables à ondes acoustiques de surface : vers des capteurs passifs multifonctionnels imprimés sur la peau(2018), ANR-15-CE08-0015,SALSA,Micro-capteur à ondes élastiques de surface à base de structures AlN/Saphir pour des températures extrêmes(2015), ANR-15-IDEX-0004,LUE,Isite LUE(2015) |
| Rok vydání: | 2020 |
| Předmět: |
Materials science
Acoustics and Ultrasonics Interdigital transducer business.industry Surface acoustic wave Automatic frequency control Lithium niobate 01 natural sciences Signal [SPI]Engineering Sciences [physics] chemistry.chemical_compound Transmission (telecommunications) chemistry 0103 physical sciences Reflection (physics) Optoelectronics [SPI.NANO]Engineering Sciences [physics]/Micro and nanotechnologies/Microelectronics Electrical and Electronic Engineering business 010301 acoustics Instrumentation Coupling coefficient of resonators |
| Zdroj: | IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, Institute of Electrical and Electronics Engineers, 2020, Volume: 67 (6), pp.1267-1274. ⟨10.1109/TUFFC.2019.2943310⟩ |
| ISSN: | 1525-8955 0885-3010 |
| DOI: | 10.1109/tuffc.2019.2943310 |
| Popis: | International audience; Remote interrogation of surface acoustic wave ID-tags imposes a high signal amplitude which is related to a high coupling coefficient value (K 2) and low propagation losses (α). In this paper, we propose and discuss an alternative configuration to the standard one. Here, we replaced the conventional configuration, i.e. one interdigital transducer (IDT) and several reflectors, by a series of electrically connected IDTs. The goal is to increase the amplitude of the detected signal using direct transmission between IDTs instead of the reflection from passive reflectors. This concept can therefore increase the interrogation scope of ID-tags made on conventional substrate with high K 2 value. Moreover, it can also be extended to suitable substrates for harsh environments such as high temperature environments: the materials used exhibit limited performances (low K 2 value and relatively high propagation losses) and are therefore rarely used for identification applications. The concept was first tested and validated using the lithium niobate 128°Y-X cut substrate, which is commonly used in ID-tags. A good agreement between experimental and numerical results was obtained for the promising concept of connected IDTs. The interesting features of the structure were also validated using a langasite substrate, which is well-known to operate at very high temperatures. Performances of both substrates (lithium niobate and langasite) were tested with an in-situ RF characterization up to 600°C. Unexpected results regarding the resilience of devices based on congruent lithium niobate were obtained. Index Terms-high temperature, lithium niobate, radio frequency identification (RFID), surface acoustic wave (SAW) |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|