Effect of Cationic Polymers on Foam Rheological Properties
| Autor: | Nikolai D. Denkov, K. P. Ananthapadmanabhan, Slavka Tcholakova, Martin Swanson Vethamuthu, N. Politova, Konstantin Golemanov |
|---|---|
| Rok vydání: | 2011 |
| Předmět: | |
| Zdroj: | Langmuir. 28:1115-1126 |
| ISSN: | 1520-5827 0743-7463 |
| DOI: | 10.1021/la2035517 |
| Popis: | We study the effect of two cationic polymers, with trade names Jaguar C13s and Merquat 100, on the rheological properties of foams stabilized with a mixture of anionic and zwitterionic surfactants (sodium lauryloxyethylene sulfate and cocoamidopropyl betaine). A series of five cosurfactants are used to compare the effect of these polymers on foaming systems with high and low surface dilatational moduli. The experiments revealed that the addition of Jaguar to the foaming solutions leads to (1) a significant increase of the foam yield stress for all systems studied, (2) the presence of consecutive maximum and minimum in the stress vs shear rate rheological curve for foams stabilized by cosurfactants with a high surface modulus (these systems cannot be described by the Herschel-Bulkley model anymore), and (3) the presence of significant foam-wall yield stress for all foaming solutions. These effects are explained with the formation of polymer bridges between the neighboring bubbles in slowly sheared foams (for inside foam friction) and between the bubbles and the confining solid wall (for foam-wall friction). Upon addition of 150 mM NaCl, the effect of Jaguar disappears. The addition of Merquat does not noticeably affect any of the foam rheological properties studied. Optical observations of foam films, formed from all these systems, show a very good correlation between the polymer bridging of the foam film surfaces and the strong polymer effect on the foam rheological properties. The obtained results demonstrate that the bubble-bubble attraction can be used for efficient control of the foam yield stress and foam-wall yield stress, without significantly affecting the viscous friction in sheared foams. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|