Investigation and analysis of glass fabric/PVC composite laminates processing parameters
| Autor: | Amir Hossein Behravesh, Ahmad Reza Bahramian, Hassan Moslemi Naeini, Behnam Abbaszadeh, Vahid Zal |
|---|---|
| Rok vydání: | 2016 |
| Předmět: |
Materials processing
Materials science Flexural modulus thermoplastic composites Glass fabric Glass fiber Industrial chemistry 02 engineering and technology Composite laminates 010402 general chemistry 021001 nanoscience & nanotechnology 01 natural sciences 0104 chemical sciences Flexural strength flexural strength TA401-492 Materials Chemistry Ceramics and Composites flexural modulus Composite material 0210 nano-technology Materials of engineering and construction. Mechanics of materials Thermoplastic composites glass fibers |
| Zdroj: | Science and Engineering of Composite Materials, Vol 25, Iss 3, Pp 529-540 (2018) |
| ISSN: | 2191-0359 0792-1233 |
| DOI: | 10.1515/secm-2015-0366 |
| Popis: | In this work, the effects of processing parameters including temperature, time, and pressure on the properties of amorphous polyvinyl chloride (PVC)/fiberglass thermoplastic composite laminates were evaluated. The film stacking and hot pressing procedure was used to produce the composite laminates, and samples with [0/90]10 layup and thickness of 3 mm were produced. Flexural strength and modulus of the samples were measured using three-point bending test (according to ASTM D790 standard test method), and microscopic images were used to evaluate the failure mechanisms and impregnation quality. The effects of the parameters on the strength were studied using analysis of variance (ANOVA), and it was found that processing temperature has the maximum effect on the products strength and increase of the temperature up to 230°C increases the flexural strength while more increase of temperature results in the matrix degradation and strength reduction. Also, processing time improves the wetting and impregnation quality; however, more increase of the processing time results in the matrix degradation and excessive reduction of the strength. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|