Design Improvement Of Dental Implant-Based On Bone Remodelling

Autor: Solehuddin Shuib, Koay Boon Aik, Zainul Ahmad Rajion
Jazyk: angličtina
Rok vydání: 2016
Předmět:
DOI: 10.5281/zenodo.1126490
Popis: There are many types of mechanical failure on the dental implant. In this project, the failure that needs to take into consideration is the bone resorption on the dental implant. Human bone has its ability to remodel after the implantation. As the dental implant is installed into the bone, the bone will detect and change the bone structure to achieve new biomechanical environment. This phenomenon is known as bone remodeling. The objective of the project is to improve the performance of dental implant by using different types of design. These designs are used to analyze and predict the failure of the dental implant by using finite element analysis (FEA) namely ANSYS. The bone is assumed to be fully attached to the implant or cement. Hence, results are then compared with other researchers. The results were presented in the form of Von Mises stress, normal stress, shear stress analysis, and displacement. The selected design will be analyzed further based on a theoretical calculation of bone remodeling on the dental implant. The results have shown that the design constructed passed the failure analysis. Therefore, the selected design is proven to have a stable performance at the recovery stage.
{"references":["A.F. Mavrogenis, R. Dimitriou, J. Parvizi, G.C. Babis, \"Biology of\nimplant osseointegration,\" J Musculoskelet Neuronal Interact, vol. 9, pp.\n61-71, 2009.","L. Levin, \"Dealing with Dental Implant Failures,\" Journal of Applied\nOral Science, vol. 16, pp. 1-5, 2008.","Academy of Osseointegration. Introduction of dental implant. Retrieved\nfrom: http://www.osseo.org/newwhatisdentalimplant.html (Cited 29\nApril 14).","Y.C. Hsuan, J.J. John, S. Müftü , \"Prediction of bone remodeling around\ndental implant systems,\" Journal of Biomechanics, vol. 41, pp. 1365-\n1373, 2008.","D. Lin, Q. Li, W. Lie, I. Ichim and M. Swain, \" Biomechanical\nEvaluation of the Effect of Bone Remodelling on Dental Implantation\nUsing Finite Element Analysis\" [online]. In: Veidt, Martin (Editor).\nProceedings of the 5th Australasian Congress on Applied Mechanics.\nBrisbane, Qld.: Engineers Australia, 2007: 639-644. Retrieved from:\n ISBN: 0858258625. (cited 03 Feb 14).","J.-R. Xiao, Y.-F. Li,S.-M. Guan, L. Song, L.-X. Xu, L. Kong, \"The\nBiomechanical Analysis of Simulating Implants in Function under\nOsteoporotic Jawbone by Comparing Cylindrical, Apical Tapered, Neck\nTapered, and Expandable Type Implants: A 3-Dimensional Finite\nElement Analysis,\" Journal of American Association of Oral and\nMaxillofacial Surgeons, vol. 67(7), pp. 273-281, 2011.","D. Swindler, \"Primate Dentition,\" in An Introduction to the Teeth of\nNon-Human Primates, ed United Kingdom: The Press Syndicate of The\nUniversity of Cambridge, 2002.","C. Aparicio, A. Padrós, F.-J. Gil, \"In vivo evaluation of micro-rough and\nbioactive titanium dental implants using histometry and pull-out tests\",\nJournal of the Mechanical Behavior of Biomedical Materials, vol. 4, pp.\n1672-1682, 2011.","D. Kurniawan, F.M. Nor, H.Y. Lee, J.Y. Lim, \"Finite element analysis\nof bone–implant biomechanics: refinement through featuring various\nosseointegration conditions\", International Journal of Oral and\nMaxillofacial Surgery, vol. 41, 2012, pp. 1090-1096.\n[10] D. Lin, Q. Li, W. Li, M. Swain, \"Dental implant induced bone\nremodeling and associated algorithms,\" Journal of the mechanical\nbehavior of biomedical materials, vol. 2, pp. 410-432, 2009.\n[11] M. Jamshidinia, L. Wang, W. Tong, R. Kovacevic, \"The bio-compatible\ndental implant designed by using non-stochastic porosity produced by\nElectron BeamMelting® (EBM),\" Journal of Materials\nProcessingTechnology, vol. 214, pp. 1728–1739, 2014.\n[12] Y.-Y. Chen, W.-P. Chen, H.-H. Chang, S.-H. Huang, C.-P. Lin, \"A\nnovel dental implant abutment with micro-motion capability—\nDevelopment and biomechanical evaluations,\" Journal of dental\nmaterials vol. 30, pp. 131-137, 2013.\n[13] Web element. Material properties of Titanium Available:\n (Cited 29 April\n14). Solehuddin Shuib, Barkawi B. Sahari, S.V. Wong , Manohar\nArumugam, and A Halim Kadarman,'Stress Analysis of Femoral Hip\nwith Bone Resorption', Trends Biomater. Artif. Organs, 27(2), 88-92\n(2013).\n[14] S.Shuib, B.B. Sahari, W.S. Voon, M. Arumugam, A.H.\nKadarman,\"Stress Analysis of Femoral Hip with Bone Resorption\"\nTrends in Biomater. Artif. Organs, 27(2), pp. 88-92, 2013.\n[15] H. Weinans, R. Huiskes, H.J. Grootenboer, \"The behavior of adaptive\nbone-remodeling simulation in models,\" Journal of Biomech vol. 25, pp.\n1425-1441, 1992.\n[16] J. Li , H. Li, L. Shi, A.S.L. Fok, C. Ucer, H. Devlin, K. Horner, N.\nSilikas \"A mathematical model for simulating the bone remodeling\nprocess under mechanical stimulus,\" Journal of dental material, pp.\n1073-1078, 2007.\n[17] D. Lin, Q. Li, W. Li, P. Rungsiyakull and M. Swain, \"Bone Resorption\ninduced by dental implants with ceramics crowns,\" Journal of the\nAustralian Ceramic Society, vol. 45, pp. 1-7, 2009.\n[18] S. Shuib, M.Z. Thor, Z.A. Rajion, and A. H. Kadarman, \"Design and\nAnalysis of Dental Implant to Reduce Failure\", in 2013 Proc.HKICEAS\nConf., pp. 12-311."]}
Databáze: OpenAIRE
Externí odkaz: